Tribrommethan
|
|
Tribrommethan Eigenschaften
- Schmelzpunkt:
- 8 °C
- Siedepunkt:
- 150 °C
- Dichte
- 2.89 g/mL at 25 °C(lit.)
- Dampfdichte
- 8.7 (vs air)
- Dampfdruck
- 5 mm Hg ( 20 °C)
- Brechungsindex
- n
20/D 1.595(lit.)
- Flammpunkt:
- 148-150°C
- storage temp.
- Store at +15°C to +25°C.
- L?slichkeit
- water: soluble800 part(lit.)
- pka
- 13.7(at 25℃)
- Aggregatzustand
- Liquid
- Farbe
- White to off-white
- Geruch (Odor)
- Chloroform-like odor
- Wasserl?slichkeit
- slightly soluble, 0.301 g/100 mL
- Sensitive
- Light Sensitive
- Merck
- 14,1420
- BRN
- 1731048
- Henry's Law Constant
- 3.36 at 20.0 °C, 7.09 at 35.0 °C, 20.5 at 50.0 °C (equilibrium static cell, Wright et al., 1992)
- Expositionsgrenzwerte
- NIOSH REL: TWA 0.5 ppm (5 mg/m3), IDLH 85e respiratory irritation (Patnaik, 1992).
- Dielectric constant
- 4.4(20℃)
- Stabilit?t:
- Stability May be an explosion hazard, especially when heated. Stable, but light-sensitive. Non-flammable. Incompatible with chemically active metals, strong bases. May contain ca 1% ethanol or 1-pentene (amylene) as a stabilizer.
- InChIKey
- DIKBFYAXUHHXCS-UHFFFAOYSA-N
- LogP
- 2.400
- Oberfl?chenspannung
- 41.5mN/m at 20°C
- CAS Datenbank
- 75-25-2(CAS DataBase Reference)
- IARC
- 3 (Vol. 52, 71) 1999
- NIST chemische Informationen
- Methane, tribromo-(75-25-2)
- EPA chemische Informationen
- Tribromomethane (75-25-2)
Sicherheit
- Risiko- und Sicherheitserkl?rung
- Gefahreninformationscode (GHS)
Kennzeichnung gef?hrlicher | T,N,F | ||
---|---|---|---|
R-S?tze: | 23-36/38-51/53-22-39/23/24/25-23/24/25-11 | ||
S-S?tze: | 28-45-61-28A-36/37-16-7-26-63 | ||
RIDADR | UN 2515 6.1/PG 3 | ||
OEB | B | ||
OEL | TWA: 0.5 ppm (5 mg/m3) [skin] | ||
WGK Germany | 3 | ||
RTECS-Nr. | PB5600000 | ||
F | 8-10 | ||
TSCA | Yes | ||
HS Code | 2903 39 19 | ||
HazardClass | 6.1 | ||
PackingGroup | III | ||
Giftige Stoffe Daten | 75-25-2(Hazardous Substances Data) | ||
Toxizit?t | LD50 s.c. in mice: 7.2 mmol/kg (Kutob, Plaa) | ||
IDLA | 850 ppm |
Bildanzeige (GHS) |
![]() ![]() ![]() ![]() |
||||||||||||||||||||||||||||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Alarmwort | Achtung | ||||||||||||||||||||||||||||||||||||||||||
Gefahrenhinweise |
|
||||||||||||||||||||||||||||||||||||||||||
Sicherheit |
|
Tribrommethan Chemische Eigenschaften,Einsatz,Produktion Methoden
ERSCHEINUNGSBILD
FARBLOSE FLüSSIGKEIT MIT CHARAKTERISTISCHEM GERUCH. GELBF?RBUNG BEI KONTAKT MIT LICHT UND LUFT.CHEMISCHE GEFAHREN
Zersetzung beim Erhitzen unter Bildung giftiger und ?tzender Rauche mit Bromwasserstoff und Brom. Schwache S?ure. Reagiert sehr heftig mit Oxidationsmitteln, Basen in Pulverform und ver?tzt die meisten Metalle. Reagiert mit Alkalimetallen, Aluminiumpulver, Zink, Magnesium und Aceton in Alkali. Feuer- und Explosionsgefahr. Greift einige Kunststoff-, Gummi- und Beschichtungsarten an.ARBEITSPLATZGRENZWERTE
TLV: 0,5 ppm (als TWA); Hautresorption; Krebskategorie A3 (best?tigte krebserzeugende Wirkung beim Tier mit unbekannter Bedeutung für den Menschen); (ACGIH 2005).MAK: Krebserzeugend Kategorie 3B; (DFG 2005).
AUFNAHMEWEGE
Aufnahme in den K?rper durch Inhalation und über die Haut.INHALATIONSGEFAHREN
Beim Verdampfen bei 20 °C kann sehr schnell eine gesundheitssch?dliche Kontamination der Luft eintreten.WIRKUNGEN BEI KURZZEITEXPOSITION
WIRKUNGEN BEI KURZZEITEXPOSITION:Tr?nenreizend. Die Substanz reizt die Atemwege, die Augen und die Haut. M?glich sind Auswirkungen auf Zentralnervensystem und Leber mit nachfolgenden Funktionsst?rungen.
WIRKUNGEN NACH WIEDERHOLTER ODER LANGZEITEXPOSITION
M?glich sind Auswirkungen auf Zentralnervensystem und Leber. Führt zu Gewebesch?den.LECKAGE
Gefahrenbereich verlassen! Fachmann zu Rate ziehen! Belüftung. Ausgelaufene Flüssigkeit m?glichst in abdichtbaren Beh?ltern sammeln. Reste mit Sand oder inertem Absorptionsmittel aufnehmen und an einen sicheren Ort bringen. NICHT in die Kanalisation spülen. NICHT in die Umwelt gelangen lassen. Pers?nliche Schutzausrüstung: Vollschutzanzug mit umgebungsluftunabh?ngigem Atemschutzger?t.R-S?tze Betriebsanweisung:
R23:Giftig beim Einatmen.R36/38:Reizt die Augen und die Haut.
R51/53:Giftig für Wasserorganismen, kann in Gew?ssern l?ngerfristig sch?dliche Wirkungen haben.
R22:Gesundheitssch?dlich beim Verschlucken.
R39/23/24/25:Giftig: ernste Gefahr irreversiblen Schadens durch Einatmen, Berührung mit der Haut und durch Verschlucken.
R23/24/25:Giftig beim Einatmen, Verschlucken und Berührung mit der Haut.
R11:Leichtentzündlich.
S-S?tze Betriebsanweisung:
S28:Bei Berührung mit der Haut sofort abwaschen mit viel . . . (vom Hersteller anzugeben).S45:Bei Unfall oder Unwohlsein sofort Arzt zuziehen (wenn m?glich, dieses Etikett vorzeigen).
S61:Freisetzung in die Umwelt vermeiden. Besondere Anweisungen einholen/Sicherheitsdatenblatt zu Rate ziehen.
S36/37:Bei der Arbeit geeignete Schutzhandschuhe und Schutzkleidung tragen.
S16:Von Zündquellen fernhalten - Nicht rauchen.
S7:Beh?lter dicht geschlossen halten.
Aussehen Eigenschaften
CHBr3; Tribrommethan; farblose, lichtempfindliche, süßlich riechende Flüssigkeit.Gefahren für Mensch und Umwelt
Die giftigen Bromoformdämpfe sind schwerer als Luft. Es reagiert mit vielen organischen Verbindungen (auch Kunststoffen) und Alkalimetallen, wobei giftige Bromverbindungen entstehen können. Es entwickelt giftige Dämpfe, die schwerer als Luft sind. Bei Erhitzen bis über den Siedepunkt findet Selbstzersetzung statt.Bromoform wirkt giftig beim Einatmen und reizt Augen, Haut und Atmungsorgane. In höheren Konzentrationen besitzt es eine narkotische Wirkung, außerdem sind Herz-, Kreislauf- und Nierenschäden möglich.
Die Resorption kann auch über den Magen-Darm-Trakt oder die Haut erfolgen. Größere Mengen verursachen Schmerzen im Hals und Magen, Tremor (Zittern), Erregungszustände, Atemstörungen und Bewußtlosigkeit.
Wassergefährdender Stoff.
Schutzma?nahmen und Verhaltensregeln
Im Abzug arbeiten.Latex- oder Neoprenschutzhandschuhe (nur als kurzzeitiger Spritzschutz).
Verhalten im Gefahrfall
Mit flüssigkeitsbindendem Material (z.B. Rench-Rapid) aufnehmen. Als Sondermüll entsorgen.Dämpfe nicht einatmen!
Auf die Umgebung abstimmen (Bromoform selbst ist nicht brennbar).
Im Brandfall entstehen giftige gasförmige Bromverbindungen (z.B. Bromwasserstoffgas). Beim Löschen umluftunabhängiges Atemschutzgerät verwenden.
Erste Hilfe
Nach Hautkontakt: Sofort gründlich mit viel Wasser abwaschen.Nach Augenkontakt: Gründlich mit viel Wasser bei geöffnetem Lidspalt mindestens 10 Minuten spülen. Arzt konsultieren.
Nach Einatmen: Frischluft. Ggf. Atemspende oder Gerätebeatmung. Arzt hinzuziehen.
Nach Verschlucken: Atemwege freihalten. Aspirationsgefahr! Paraffinöl (3 ml/kg). Natriumsulfat (1 Eßl./ 1/4 l Wasser). Aktivkohle.
Keine Milch. Kein Alkohol.
Nach Kleidungskontakt: Kontaminierte Kleidung sofort ausziehen.
Ersthelfer: siehe gesonderten Anschlag
Sachgerechte Entsorgung
Als Sondermüll (halogenhaltiges Lösungsmittel) entsorgen.Chemische Eigenschaften
Bromoform is a colorless to pale yellow liquid with a high refractive index, very high density, and sweetish odor is similar to that of chloroform. It is slightly soluble in water and is nonflammable. Bromoform can form in drinking water as a by-product from the reaction of chlorine with dissolved organic matter and bromide ions.Physikalische Eigenschaften
Clear, colorless to yellow liquid with a chloroform-like odor. Odor threshold concentration in water is 0.3 mg/kg (Verschueren, 1982).Definition
ChEBI: Bromoform is a member of bromomethanes and a bromohydrocarbon.Application
In separating mixtures of minerals. Bromoform is used as a fluid for mineral ore separation in geological tests, as a laboratory reagent, and in the electronics industry in quality assurance programs.Bromoform was formerly used as a solvent for waxes, greases, and oils, as an ingredient in fire-resistant chemicals and in fluid gauges. It was also used in the early part of this century as a medicine to help children with whooping cough get to sleep. Currently, bromoform is only produced in small amounts for use in laboratories and in geological and electronics testing.
synthetische
Bromoform can be prepared by reacting chloroform (see IAC, 1987) with aluminium tribromide at less th an or equal to 60°C; by reacting ethanol with sodium hypobromite; or by the redistribution reaction between chloroform and ethyl bromide (Harlow & Ross, 1932; Soroos & Hinkamp, 1945; Sherman & Kavasmaneck, 1980).Allgemeine Beschreibung
Bromoform appears as a colorless liquid with a chloroform-like odor. Denser than water (density: 2.9 g / cm3 ) and slightly soluble in water. Hence sinks in water. Nonflammable. Toxic by ingestion, inhalation and skin absorption. A lachrymator. Used as a solvent and to make pharmaceuticals. Often stabilized with 1 to 3% ethanol.Air & Water Reaktionen
Slightly soluble in water.Reaktivit?t anzeigen
Heating Bromoform to decomposition produces highly toxic fumes of carbon oxybromide (carbonyl bromide) and hydrogen bromide [Sax, 9th ed., 1996, p. 519]. Reaction with powdered potassium or sodium hydroxide, Li or Na/K alloys, is violently exothermic [Weizmann, C. et al., J. Am Chem. Soc., 1948, 70, p. 1189]. Explosive reaction with crown ethers in the presence of potassium hydroxide [Le Goaller, R. et al., Synth. Comm., 1982, 12, p. 1163].Hazard
A questionable carcinogen. By ingestion, inhalation, and skin absorption. Liver damage, eye and upper respiratory tract irritant.Health Hazard
Probable routes of human exposure to bromoform are inhalation, ingestion, and dermal contact.Harmful if inhaled, swallowed, contacts skin or eyes or is absorbed through skin. It is a lachrymator, respiratory irritant, a narcotic and an hepatotoxin. Prolonged exposure may cause dermatitis. Inhalation causes irritation of nose and throat; provokes the flow of tears and saliva and reddening of the face. Ingestion may cause dizziness, disorientation and slurred speech, unconsciousness and death.
Non-Cancer: Bromoform is a central nervous system depressant, and its vapors are highly irritating to the eyes and respiratory tract. Limited observations in humans and animal studies indicate that acute inhalation or oral exposure to high levels of bromoform may cause liver and kidney injury. Chronic effects of bromoform exposure in humans have not been studied, although animal studies indicate adverse effects on the liver, kidney, and central nervous system (U.S. EPA, 1994a).
Brandgefahr
Behavior in Fire: May decompose to produce toxic gases and vapor such as hydrogen bromide and bromine.Sicherheitsprofil
Suspected carcinogen with experimental neoplastigenic data. A human poison by ingestion. Moderately toxic by intraperitoneal and subcutaneous routes. Human mutation data reported. A lachrymator. It can damage the liver to a serious degree and cause death. It has anesthetic properties simdar to those of chloroform, but is not sufficiently volatile for inhalation purposes and is far too toxic for human use. As a sedative and antitussive its medicinal application has resulted in numerous poisonings. Inhalation of small amounts causes irritation, provoking the flow of tears and saliva, and reddening of the face. Abuse can lead to adhction and serious consequences. Explosive reaction with crown ethers or potassium hydroxide. Violent reaction with acetone or bases. Incompatible with Li or NaK alloys. When heated to decomposition it emits hghly toxic fumes of Br-. See also BROMIDES.Environmental Fate
Biological. Bromoform showed significant degradation with gradual adaptation in a staticculture flask-screening test (settled domestic wastewater inoculum) conducted at 25 °C. At concentrations of 5 and 10 mg/L, percent losses after 4 wk of incubation were 48 and 35, respectively (Tabak et al., 1981).Surface Water. Kaczmar et al. (1984) estimated the volatilization half-life of bromoform from rivers and streams to be 65.6 d.
Chemical/Physical. The estimated hydrolysis half-life in water at 25 °C and pH 7 is 686 yr (Mabey and Mill, 1978). Products of hydrolysis include carbon monoxide and hydrobromic acid (Kollig, 1993). When an aqueous solution containing bromoform was purged with hydrogen for 24 h, only 5% of the bromoform reacted to form methane and minor traces of ethane. In the presence of colloidal platinum catalyst, the reaction proceeded at a much faster rate forming the same end products (Wang et al., 1988). In an earlier study, water containing 2,000 ng/μL of bromoform and colloidal platinum catalyst was irradiated with UV light. After 20 h, about 50% of the bromoform had reacted. A duplicate experiment was performed but the concentration of bromoform was increased to 3,000 ng/μL and 0.1 g zinc was added. After 14 h, only 0.1 ng/μL bromoform remained. Anticipated transformation products include methane and bromide ions (Wang and Tan, 1988).
At influent concentrations of 1.0, 0.1, 0.01, and 0.001 mg/L, the adsorption capacities of the GAC used were 19.6, 5.9, 1.8, and 0.52 mg/g, respectively (Dobbs and Cohen, 1980).
l?uterung methode
The storage and stability of bromoform and chloroform are similar. Ethanol, added as a stabilizer, is removed by washing with H2O or with saturated CaCl2 solution, and the CHBr3, after drying with CaCl2 or K2CO3, is fractionally distilled. Prior to distillation, CHBr3 has also been washed with conc H2SO4 until the acid layer is no longer coloured, then dilute NaOH or NaHCO3, and H2O. A further purification step is fractional crystallisation by partial freezing. [Beilstein 1 IV 82.]Tribrommethan Upstream-Materialien And Downstream Produkte
Upstream-Materialien
Natriumhypobromit
Natriumbromit
Kaliumhydroxid
Aceton
Natriumthiosulfat
Bromaceton
Brom
Natriumhydroxid
Sodium thiosulfate pentahydrate
Hydroxylammoniumchlorid
Schwefelsure
Natriumcarbonat
2-Brom-2-methylpropionsure
3-Methylbutanon
Bromessigs?ure
Isobutters?ure
Octan-2-on
Downstream Produkte
Tribrommethan Anbieter Lieferant Produzent Hersteller Vertrieb H?ndler.
Global( 391)Lieferanten
Firmenname | Telefon | Land | Produktkatalog | Edge Rate | |
---|---|---|---|---|---|
Career Henan Chemica Co | +86-0371-86658258 +8613203830695 |
laboratory@coreychem.com | China | 30231 | 58 |
Hebei Yanxi Chemical Co., Ltd. | +8617531153977 |
allison@yan-xi.com | China | 5854 | 58 |
Firsky International Trade (Wuhan) Co., Ltd | +8615387054039 |
admin@firsky-cn.com | China | 427 | 58 |
Henan Fengda Chemical Co., Ltd | +86-371-86557731 +86-13613820652 |
info@fdachem.com | China | 20235 | 58 |
Capot Chemical Co.,Ltd. | +86-(0)57185586718 +86-13336195806 |
sales@capot.com | China | 29730 | 60 |
Yancheng Longshen Chemical Co.,Ltd. | +86-0515-88706880 +86-18352070299 |
sales@longshenchem.com | China | 79 | 55 |
Shanghai Bojing Chemical Co.,Ltd. | +86-86-02137122233 +8613795318958 |
bj1@bj-chem.com | China | 299 | 55 |
Tianjin Zhongxin Chemtech Co., Ltd. | 86-22-66880623 +8618622897568 |
sales@tjzxchem.com | China | 572 | 58 |
career henan chemical co | +86-0371-86658258 +8613203830695 |
sales@coreychem.com | China | 29858 | 58 |
Xiamen AmoyChem Co., Ltd | +86-86-5926051114 +8615060885618 |
sales@amoychem.com | China | 6383 | 58 |
75-25-2(Tribrommethan)Verwandte Suche:
Dibromchlormethan
Bromofluoromethane
Brom(diphenyl)methan
Dibrommethan
Trometamol
2,2-Bis(allyloxymethyl)butan-1-ol
Kohlenstofftetrabromid
1,1,1-Tribrom-2,2,2-trifluorethan
Tetrabromethan
2,2,2-Tribromethanol
[(Tribrommethyl)sulfonyl]benzol
Pentabromethan
2-(α,α,α-Tribrommethyl)chinolin
Tribromessigsure
Bromtrifluormethan
Tribromfluormethan
Brommethan
Bromchlormethan
- rcrawastenumberu225
- Tribrommethaan
- Tribrommethan
- Tribromometan
- tribromo-methan
- tribromomethane(bromoform)
- METHENYL TRIBROMIDE
- BROMOFORM
- BROMOFORM OEKANAL, AMYLENE STABILIZED, 1G
- BROMOFORM, 99+%
- BROMOFORM D20/4 2,870-2,890, FOR THESEPA RATION OF MINERAL COMPOUNDS
- BROMOFORM, 1X1ML, MEOH, 200UG/ML
- BROMOFORM, 1X1ML, MEOH, 5000UG/ML
- Bromoforme
- bromoforme(french)
- Bromoformio
- Bromoform, spectro grade, 99%, stabilized
- Bromoform, 97%, stab. with approx. 1% ethanol
- Bromoform (1mg/ml in Methanol) [for Water Analysis]
- Bromoform (stabilized with Ethanol)
- Bromoform,99%,spectro grade, stabilized
- Bromoform,99+%,stabilized
- Bromoform,96%,stabilized
- Bromoform, 97%, stab. with ca 3% ethanol
- Tribromomethane Standard
- BroMoforM (stabilized with DiphenylaMine) [for SpectrophotoMetry]
- BroMoforM 
- BroMoforM, spectro grade, stabilized, 99% 50ML
- Bromoform 5g [75-25-2]
- Bromoform 2g [75-25-2]
- Bromoform, stabilized, for spectroscopy, 99%
- Tribromomethane in methanol
- BROMOFORM FOR SEPARATION OF MINERALS MIX
- BroMoforM, Stabilized, Purified
- Formyltribromide
- Methane,tribromo-
- methyltribromide
- NCI-C55130
- Rcra waste number U225
- BROMOFORM, STAB.
- BromoformExtraPure
- Bromoform.SpectroGrade99%Stablized
- BromoformSpecial
- Bromoform,97%
- Bromoform, stabilized, 96%
- Bromoform, stabilized, 99+%
- bromoform solution
- BROMOFORM,PURIFIED
- BROMOFORM(TRIBROMOMETHANE)
- BROMOFORM , STABILIZED WITH APPROX. 1% ETHANOL
- Bromoform, spectro grade, stabilized, 99%
- Bromoform, 97%, stab. with ethanol
- Bromoform (stabilized with Diphenylamine)
- BroMoforM contains 1-3% ethanol as stabilizer, 96%
- BroMoforM contains 60-120 ppM 2-Methyl-2-butene as stabilizer, 99%
- Bromoform, 97%, stabilized
- Bromoform (stabilized with 2-Methyl-2-butene)[for Spectrophotometry]
- Bromoform, 99%, stabilized with 1% C2H5OH