Schwefelsure Chemische Eigenschaften,Einsatz,Produktion Methoden
ERSCHEINUNGSBILD
FARBLOSE, ?LIGE, HYGROSKOPISCHE FLüSSIGKEIT , GERUCHLOS.
ARBEITSPLATZGRENZWERTE
TLV: 0,2 mg/m?(als TWA, thoraxg?ngige Fraktion) Krebskategorie A2 (Verdacht auf krebserzeugende Wirkung beim Menschen) (Schwefels?ure als Bestandteil starker anorganischer S?urenebel) (ACGIH 2005).
MAK: 0,1 mg/m?(Einatembare Fraktion); Spitzenbegrenzung: überschreitungsfaktor I(1); Krebserzeugend Kategorie 4; Schwangerschaft: Gruppe C; (DFG 2005).
AUFNAHMEWEGE
Aufnahme in den K?rper durch Inhalation des Aerosols und durch Verschlucken.
INHALATIONSGEFAHREN
Verdampfung bei 20°C vernachl?ssigbar; eine gesundheitssch?dliche Partikelkonzentration in der Luft kann jedoch beim Versprühen schnell erreicht werden.
WIRKUNGEN BEI KURZZEITEXPOSITION
WIRKUNGEN BEI KURZZEITEXPOSITION: ?tzend. Die Substanz ver?tzt stark die Augen, die Haut und die Atemwege. ?tzend beim Verschlucken. Inhalation eines Aerosols dieser Substanz kann zu Lungen?dem führen (s.Anm.).
WIRKUNGEN NACH WIEDERHOLTER ODER LANGZEITEXPOSITION
Risiko der Lungensch?digung bei wiederholter oder l?ngerer Exposition gegenüber eines Aerosols dieser Substanz. Risiko der Zahnsch?digung bei wiederholter oder l?ngerer Exposition gegenüber eines Aerosols dieser Substanz. Nebel starker anorganischer S?uren, die diese Substanz enthalten, sind krebserzeugend für den Menschen.
LECKAGE
Fachmann zu Rate ziehen! Gefahrenbereich verlassen! NICHT mit S?gemehl oder anderen brennbaren Absorptionsmitteln binden. Pers?nliche Schutzausrüstung: Vollschutzanzug mit umgebungsluftunabh?ngigem Atemschutzger?t. NICHT in die Umwelt gelangen lassen.
R-S?tze Betriebsanweisung:
R36/38:Reizt die Augen und die Haut.
R35:Verursacht schwere Ver?tzungen.
R39/23/24/25:Giftig: ernste Gefahr irreversiblen Schadens durch Einatmen, Berührung mit der Haut und durch Verschlucken.
R23/24/25:Giftig beim Einatmen, Verschlucken und Berührung mit der Haut.
R11:Leichtentzündlich.
S-S?tze Betriebsanweisung:
S26:Bei Berührung mit den Augen sofort gründlich mit Wasser abspülen und Arzt konsultieren.
S30:Niemals Wasser hinzugie?en.
S45:Bei Unfall oder Unwohlsein sofort Arzt zuziehen (wenn m?glich, dieses Etikett vorzeigen).
S36/37:Bei der Arbeit geeignete Schutzhandschuhe und Schutzkleidung tragen.
S16:Von Zündquellen fernhalten - Nicht rauchen.
Beschreibung
Reactivity
Sulfuric acid is very reactive and dissolves most metals, it is
a concentrated acid that oxidizes, dehydrates, or sulfonates
most organic compounds, often causes charring.
Sulfuric acid reacts violently with alcohol and water to release
heat. It reacts with most metals, particularly when diluted with
water, to form flammable hydrogen gas, which may create an
explosion hazard. Sulfuric acid is not combustible, but it is
a strong oxidizer that enhances the combustion of other substances,
does not burn itself. During fire, poisonous gases are
emitted. Hazardous decomposition products are as follows:
sulfur dioxide, sulfur trioxide, and sulfuric acid fumes.
Note: Use great caution in mixing with water due to heat
release that causes explosions. Always add the acid to water,
never the reverse.
Where Found
l Car battery acid
l Certain detergents
l Chemical munitions
l Some fertilizers
l Some toilet bowl cleaners
Derivation
Sulfuric acid is made from sulfur, pyrite (FeS2), hydrogen
sulfide, or sulfur-containing smelter gases by the contact process
(vanadium pentoxide catalyst). The first step is combustion of
elemental sulfur, or roasting of iron pyrites, to yield sulfur
dioxide. Then follows the critical reaction, catalytic oxidation of
sulfur dioxide to sulfur trioxide.
Chemische Eigenschaften
Sulfuric acid is a colorless to dark brown, odorless, oily liquid which is commercially sold @ 93% to 98% H2SO4, the remainder being water.
History
Sulfuric acid is a colorless, oily, dense liquid that is one of the most important industrial chemicals. More than 40 million tons are produced in the United States annually and approximately 170 million tons are produced globally. Sulfuric acid has a long history and was first produced by ancient alchemists. Its discovery is credited to the Persian physician Mohammad Ibn Zakariya al-Razi (Rhazes, 854 925), who produced sulfuric acid from the dry distillation of minerals. Dry distillation typically involves heating a substance in a closed container to limit oxygen and combustion. As the substance is heated, it decomposes and the volatile components can be captured. Because sulfuric acid was obtained from distilling minerals, it is called a mineral acid. The ancient method of sulfuric acid production involved heating either iron (II) sulfate heptahydrate (FeSO4 7H2O), which was called green vitriol, or copper (II) sulfate pentahydrate (CuSO4 5H2O), called blue vitriol. When minerals containing these compounds were heated, the products included sulfur trioxide (SO3) and water. The combination of sulfur trioxide and water produced sulfuric acid: SO3(g) + H2O(l) H2SO4(aq). The production of sulfuric acid from natural minerals called vitriols and its oily appearance led to the common name oil of vitriol for sulfuric acid.
Verwenden
Sulfuric Acid is an acidulant that is a clear, colorless, odorless liquid
with great affinity for water. it is prepared by reacting sulfur dioxide
with oxygen and mixing the resulting sulfur trioxide with water, or
by reacting nitric oxide with sulfur dioxide in water. it is very cor-
rosive. it is used as a modifier of food starch and is used in caramel
production and in alcoholic beverages.
Vorbereitung Methode
Sulfuric acid may be prepared industrially by either the contact process or the chamber process.
Contact Process
2SO2＋O2→2SO3
SO3＋H2O→H2SO4
Chamber Process
2NO＋O2→2NO2
NO2＋SO2＋H2O→H2SO4＋NO
Allgemeine Beschreibung
Sulphuric acid may be prepared by catalytic oxidation of sulphur dioxide. It is a very strong electrolyte and has high affinity to water.
Air & Water Reaktionen
Reaction with water is negligible unless acid strength is above 80-90% then heat from hydrolysis is extreme, may cause severe burns [Merck, 11th ed. 1989]. During sulfonation of mononitrobenzene by fuming Sulfuric acid , a leak from an internal cooling coil permitted water to enter the reaction tank. A violent eruption occurred due to the heat of solution [MCA Case History 944 1963].
Hazard
Strong irritant to tissue. Pulmonary function
inhibitor. Confirmed carcinogen.
Health Hazard
Concentrated sulfuric acid is a highly corrosive liquid that can cause severe, deep burns upon skin contact. The concentrated acid destroys tissue because of its dehydrating action, while dilute H 2SO4 acts as a skin irritant because of its acid character. Eye contact with concentrated H2SO4 causes severe burns, which can result in permanent loss of vision; contact with dilute H2SO4 results in more transient effects from which recovery may be complete. Sulfuric acid mist severely irritates the eyes, respiratory tract, and skin. Because of its low vapor pressure, the principal inhalation hazard from sulfuric acid involves breathing in acid mists, which may result in irritation of the upper respiratory passages and erosion of dental surfaces. Higher inhalation exposures may lead to temporary lung irritation with difficulty breathing. Ingestion of sulfuric acid may cause severe burns to the mucous membranes of the mouth and esophagus. Animal testing with sulfuric acid did not demonstrate carcinogenic, mutagenic, embryotoxic, or reproductive effects. Chronic exposure to sulfuric acid mist may lead to bronchitis, skin lesions, conjunctivitis, and erosion of teeth.
Brandgefahr
Sulfuric acid is highly reactive and capable of igniting finely-divided combustible materials on contact. When heated, Sulfuric acid emits highly toxic fumes. Avoid heat; water and organic materials. Sulfuric acid is explosive or incompatible with an enormous array of substances. Can undergo violent chemical change at elevated temperatures and pressure. May react violently with water. When heated, Sulfuric acid emits highly toxic fumes. Hazardous polymerization may not occur.
Flammability and Explosibility
Sulfuric acid is noncombustible but can cause finely divided combustible substances
to ignite. Sulfuric acid reacts with most metals, especially when dilute, to produce
flammable and potentially explosive hydrogen gas.
Pharmazeutische Anwendungen
Sulfuric acid is used as an acidifying agent in a variety of
pharmaceutical and food preparations. It may also be used to
prepare dilute sulfuric acid, which, in addition to its use as an
excipient, has some therapeutic use for the treatment of gastric
hypoacidity, as an astringent in diarrhea, or to stimulate appetite.
Sulfuric acid has been used in parenteral, oral, topical, and
ophthalmic pharmaceutical formulations.
Industrielle Verwendung
Sulfuric acid (H
2SO
4) is the most widely used acid for pH control in mineral flotation.
Sulfuric acid can be manufactured by several processes including the burning of pure
sulfur, roasting of pyrite and from the recovery of SO
2 stack gas from a smelter operation.
Sulfuric acid is a colorless to amber, slightly cloudy and oily liquid with a specific
gravity of 1.84 at 95% strength.
In mineral flotation, sulfuric acid is used in almost all applications involving acid pH
control. It is also used as a pulp pretreatment chemical during flotation of oxidic and
industrial minerals. Pulp pretreatment with sulfuric acid improves flotation of ilmenite,
perovskite, phenacite, beryl and other minerals.
Sicherheit(Safety)
Sulfuric acid is widely used in a variety of pharmaceutical
formulations. Although concentrated sulfuric acid is very corrosive,
it is normally used well diluted in formulations. Concentrated
sulfuric acid will react violently with water and much heat is
generated. When diluting sulfuric acid, the acid should always be
added to the other liquid with great caution.
The concentrated solution is extremely corrosive and can cause
severe damage or necrosis on contact with the eyes and skin.
Ingestion may cause severe injury or death. Inhalation of
concentrated vapors can cause serious lung damage.
LD50 (rat, oral): 2.14 g/kg
m?gliche Exposition
Used as a chemical feedstock in the manufacture of acetic acid, hydrochloric acid; citric acid; phosphoric acid; aluminum sulfate; ammonium sulfate;barium sulfate; copper sulfate; phenol, superphosphates, titanium dioxide; as well as synthetic fertilizers, nitrate explosives; artificial fibers; dyes, pharmaceuticals, detergents, glue, paint, and paper. It finds use as a dehydrating agent for esters and ethers due to its high affinity for water; as an electrolyte in storage batteries; for the hydrolysis of cellulose to obtain glucose; in the refining of mineral and vegetable oil; and in the leather industry. Other uses include fur and food processing; carbonization of wool fabrics; gas drying; uranium extraction from pitchblende; and laboratory analysis. Sulfuric acid is among the highestvolume produced chemical in the United States.
Carcinogenicity
Strong inorganic acid mists containing sulfuric acid are known to be human carcinogens based on sufficient evidence of carcinogenicity
from studies in humans.
Environmental Fate
Although sulfuric acid can be extremely harmful, it is a naturally
occurring compound. The release of sulfur into the
biosphere is not from anthropogenic sources. It is also a major
compound that is released in volcanic eruptions when oxides
of sulfur are emitted:
Sulfur trioxide will dissolve in rainwater to form sulfuric
acid
SO3 ＋ H2O → H2SO4:
Sulfur dioxide will dissolve in rainwater to form sulfurous
acid (H2SO3), and is then oxidized to form sulfuric acid,
which leads to acid rains.
The presence of sulfuric acid is related with the natural
ability of microorganisms that can be found in or isolated from
acid mine water or from sulfur and iron sulfide mines as well as
volcanoes.
The examples of such bacteria are:
Acidithiobacillus ferrooxidans (Thiobacillus ferrooxidans) that
lives in pyrite deposits, metabolizing iron and sulfur and
producing sulfuric acid.
Acidithiobacillus thiooxidans (Thiobacillus thiooxidans, Thiobacillus
concretivorus) that utilizes sulfur and produces
sulfuric acid.
Lager
Splash goggles and rubber gloves should be worn when
handling this acid, and containers of sulfuric acid should be stored in a wellventilated
location, separated from organic substances and other combustible
materials. Containers of sulfuric acid should be stored in secondary plastic trays to
avoid corrosion of metal storage shelves due to drips or spills. Water should never
be added to sulfuric acid because splattering may result; always add acid to water
Versand/Shipping
UN1830 Sulfuric acid with ＞51% acid or sulfuric acid with not ＞51% acid, Hazard class: 8; Labels: 8-Corrosive material. UN1831 Sulfuric acid, fuming with 30% or more free sulfur trioxide and Sulfuric acid, fuming, with ＜30% free sulfur trioxide, Hazard class: 8; Labels: 8-Corrosive material. UN1832 Sulfuric acid, spent, Hazard class: 8; Labels: 8-Corrosive material.
l?uterung methode
Sulfuric acid, and also 30% fuming H2SO4, can be distilled in an all-Pyrex system, optionally from potassium persulfate. It has been purified by fractional crystallisation of the monohydrate from the liquid. It has a very strong dehydrating action and attacks skin—wash immediately with cold H2O; otherwise the skin can be scarred for life. It is very hygroscopic and has been used as a desiccant in desiccators. Dilution with H2O is highly exothermic, and because the concentrated acid is much more dense than H2O it is diluted by running the concentrated acid down the side of the container of H2O with slowly stirring while cooling the outside of the container. If these precautions are not taken, the H2O is likely to boil vigorously.
Inkompatibilit?ten
Avoid storage in close proximity to water, most common metals,
organic materials, strong reducing agents, combustible materials,
strong bases, carbonates, sulfides, cyanides, strong oxidizing agents,
and carbides.
Sulfuric acid is a powerful oxidizer and may ignite or explode on
contact with many materials.
It can react violently with the evolution of a large amount of
heat. Oxides of sulfur and hydrogen can be generated during
reactions.
Great care must be exercised when mixing with other liquids.
Always add sulfuric acid to the diluent with great caution.
Waste disposal
Add slowly to solution of soda ash and slaked lime with stirring; flush to drain with large volumes of water. Recovery and reuse of spent sulfuric acid may be a viable alternative to disposal, and processes are available.
Regulatory Status
GRAS listed. Accepted for use as a food additive in Europe.
Included in the FDA Inactive Ingredients Database (IM, IV, and IP
injections, inhalation solutions, irrigation solutions, nasal, ophthalmic
solutions and suspensions, oral solutions, and topical emulsions
and creams). Included in nonparenteral and parenteral medicines
licensed in Europe. Included in the Canadian List of Acceptable
Non-medicinal Ingredients.
The United Nations Convention Against Illicit Traffic in
Narcotic Drugs and Psychotropic Substances (1988) lists sulfuric
acid as a chemical frequently used in the illicit manufacture of
narcotic drugs or psychotropic substances. In the USA, sulfuric
acid is included in the list of essential or precursor chemicals
established pursuant to the Chemical Diversion and Trafficking Act.
Accordingly, transactions of sulfuric acid such as imports, exports,
sales, and transfers are subject to regulation and monitoring by the
Drug Enforcement Administration.
Schwefelsure Upstream-Materialien And Downstream Produkte
Upstream-Materialien
Downstream Produkte
2-Amino-5-nitro-4-picoline
4-Nitro-2-(trifluoromethyl)benzoyl chloride
2-Hydroxy-4-(trifluoromethyl)quinoline
tert-Pentylbenzol
5-Sulfosalicylsure
2-Amino-3,6,8-naphthalenetrisulfonic acid
2-NITROTHIOPHENE-4-CARBOXALDEHYDE
4-CHLOROMETHYL-7-METHOXY-CHROMEN-2-ONE
Methyltricosanoat
Zirconium sulfate tetrahydrate
3,4-(Methylendioxy)phenol
N,N'-Bis(2-aminoethyl)ethylendiamindihydrochlorid
1-BENZOTHIOPHENE-3-SULFONYL CHLORIDE
2,6-Dimethyl-3-nitropyridin
N5,N5-Diethyltoluol-2,5-diaminmonohydrochlorid
3-BROMOQUINOLINE-8-SULFONIC ACID
(4-Amino-m-tolyl)ethyl(2-hydroxy-ethyl)ammoniumsulfat
N,N-Diethyl-1,4-benzoldiamin-sulfat (1:1)
1,1'-Oxydipropan-2-ol
6-AMINO-5-METHYLPYRIDINE-3-SULFONIC ACID
Tricobalttetraoxid
2-ethyl-5-nitrobenzenamine
3,3'-DINITROBENZOPHENONE
2-Oxopyran-5-carbonsure
Amikacin sulfate salt
2,6-DIFLUORO-4-NITROANILINE
4-Chloro-3,5-dinitrobenzoic acid
Vat Blue BC
Dispersing agent DN
2-Amino-5-bromo-3-nitropyridine
Titanoxidsulfat
Ethyl-3-brombenzoat
Thiodi(essigsure)
Amikacinbis(sulfat)
Sulfur-magnesium fertilizer
Conditioner for metal surface
Methyl 3-bromo-4-methylbenzoate
2-NITROTHIOPHENE-4-CARBOXYLIC ACID
6-Fluoro-4-(trifluoromethyl)-2(1H)-quinolinone
2-METHYL-5-NITROBENZONITRILE
