5-Methylhexan-2-on Chemische Eigenschaften,Einsatz,Produktion Methoden
ERSCHEINUNGSBILD
FARBLOSE FLüSSIGKEIT MIT CHARAKTERISTISCHEM GERUCH.
PHYSIKALISCHE GEFAHREN
Die D?mpfe mischen sich leicht mit Luft. Bildung explosionsf?higer Gemische.
CHEMISCHE GEFAHREN
Reagiert sehr heftig mit starken Oxidationsmitteln, starken Basen, Aminen und Isocyanaten unter Feuer- und Explosionsgefahr. Greift einige Kunststoffe an.
ARBEITSPLATZGRENZWERTE
TLV: 50 ppm (als TWA); (ACGIH 2005).
MAK: 10 ppm 47 mg/m?Spitzenbegrenzung: überschreitungsfaktor I(2); Schwangerschaft: Gruppe D (DFG 2008).
AUFNAHMEWEGE
Aufnahme in den K?rper durch Inhalation der D?mpfe.
INHALATIONSGEFAHREN
Beim Verdampfen bei 20°C tritt langsam eine gesundheitssch?dliche Kontamination der Luft ein.
WIRKUNGEN BEI KURZZEITEXPOSITION
WIRKUNGEN BEI KURZZEITEXPOSITION: Die Substanz reizt Augen, Haut und Atemwege. M?glich sind Auswirkungen auf die Nieren mit nachfolgenden Nierensch?den. Exposition oberhalb der Arbeitsplatzgrenzwerte kann Bewusstseinstrübung verursachen.
WIRKUNGEN NACH WIEDERHOLTER ODER LANGZEITEXPOSITION
Wiederholter oder andauernder Hautkontakt kann Dermatitis hervorrufen.
LECKAGE
Belüftung. Ausgelaufene Flüssigkeit m?glichst in abdichtbaren Beh?ltern sammeln. Reste mit Sand oder inertem Absorptionsmittel aufnehmen und an einen sicheren Ort bringen. NICHT in die Kanalisation spülen. Pers?nliche Schutzausrüstung: Atemschutzfilter für organische Gase und D?mpfe.
R-S?tze Betriebsanweisung:
R10:Entzündlich.
R20:Gesundheitssch?dlich beim Einatmen.
S-S?tze Betriebsanweisung:
S23:Gas/Rauch/Dampf/Aerosol nicht einatmen(geeignete Bezeichnung(en) vom Hersteller anzugeben).
S24/25:Berührung mit den Augen und der Haut vermeiden.
Application
Methyl isoamyl ketone (MIAK) is used asa solvent for polymers, cellulose esters, nitrocellulose, cellulose acetatebutyrate, andacrylics, and vinyl copolymers.
Verwenden
5-Methyl-2-hexanone is used as a solvent for the production of high-solids coatings, because it possesses a high solubility for alkyd resins, acrylic resins, cellulose esters, cellulose nitrate, and vinylic copolymers. 5-Methyl-2-hexanone may be used to synthesize N,N′-bis(1,4-dimethylpentyl)-p-phenylenediamine (BMPPD) via reductive alkylation of p-nitroaniline in the presence of copper-based catalysts.
Definition
ChEBI: 5-methyl-2-hexanone is a ketone.
synthetische
5-Methyl-2-hexanone is produced by condensation of acetone with isobutyraldehyde. This reaction may be carried out in one or two steps, in the liquid or in the gas phase.
Allgemeine Beschreibung
5-methylhexan-2-one appears as a colorless liquid with a pleasant fruity odor. Less dense than water. Vapors heavier than air. Used as a solvent and for making other chemicals.
Air & Water Reaktionen
Flammable. Slightly soluble in water.
Reaktivit?t anzeigen
Ketones, such as 5-Methyl-2-hexanone, are reactive with many acids and bases liberating heat and flammable gases (e.g., H2). The amount of heat may be sufficient to start a fire in the unreacted portion of the ketone. Ketones react with reducing agents such as hydrides, alkali metals, and nitrides to produce flammable gas (H2) and heat. Ketones are incompatible with isocyanates, aldehydes, cyanides, peroxides, and anhydrides. They react violently with aldehydes, HNO3, HNO3 + H2O2, and HClO4.
Hazard
Moderate fire risk. Central nervous systemimpairment and upper respiratory tract irritant.
Health Hazard
Inhalation or contact with material may irritate or burn skin and eyes. Fire may produce irritating, corrosive and/or toxic gases. Vapors may cause dizziness or suffocation. Runoff from fire control may cause pollution.
Brandgefahr
HIGHLY FLAMMABLE: Will be easily ignited by heat, sparks or flames. Vapors may form explosive mixtures with air. Vapors may travel to source of ignition and flash back. Most vapors are heavier than air. They will spread along ground and collect in low or confined areas (sewers, basements, tanks). Vapor explosion hazard indoors, outdoors or in sewers. Runoff to sewer may create fire or explosion hazard. Containers may explode when heated. Many liquids are lighter than water.
Sicherheitsprofil
Moderately toxic by
ingestion and intraperitoneal routes. Mildly
toxic by inhalation and skin contact. A
flammable liquid when exposed to heat,
flame, or oxidzers. To fight fire, use dry
chemical, CO2, foam, fog. When heated to
decomposition it emits acrid smoke and
irritating fumes.
m?gliche Exposition
MIAK is used as a solvent for
cellulose esters, acrylics, and vinyl copolymers.
Versand/Shipping
UN23025-Methylhexan-2-one, Hazard Class: 3;
Labels: 3-Flammable liquid.
Inkompatibilit?ten
Incompatible with oxidizers (chlorates,
nitrates, peroxides, permanganates, perchlorates, chlorine,
bromine, fluorine, etc.); contact may cause fires or explosions. Keep away from alkaline materials, strong bases,
strong acids, oxoacids, epoxides, nitrated amines, azo,
diazo, azido compounds, carbamates, organic cyanates.
Attacks some plastics and coatings
Waste disposal
Dissolve or mix the material
with a combustible solvent and burn in a chemical incinerator equipped with an afterburner and scrubber. All
federal, state, and local environmental regulations must be
observed.
5-Methylhexan-2-on Upstream-Materialien And Downstream Produkte
Upstream-Materialien
Downstream Produkte