Natriumhydrogensulfid Chemische Eigenschaften,Einsatz,Produktion Methoden
ERSCHEINUNGSBILD
WEISSE HYGROSKOPISCHE KRISTALLE MIT CHARAKTERISTISCHEM GERUCH.
CHEMISCHE GEFAHREN
Starke Base in w?ssriger L?sung. Reagiert sehr heftig mit S?uren. ?tzend. Die Substanz zersetzt sich beim Erhitzen unter Bildung von Schwefeloxiden. Die Substanz zersetzt sich bei Kontakt mit Wasser unter Bildung von Schwefelwasserstoff. Greift Metall an. Reagiert mit starken Oxidationsmitteln unter Bildung von Schwefeloxiden. (Siehe ICSC 0165).
ARBEITSPLATZGRENZWERTE
TLV nicht festgelegt.
MAK nicht festgelegt.
AUFNAHMEWEGE
Schwerwiegende lokale Wirkungen auf allen Aufnahmewegen.
INHALATIONSGEFAHREN
Verdampfung bei 20°C vernachl?ssigbar; eine gesundheitssch?dliche Partikelkonzentration in der Luft kann jedoch beim Dispergieren schnell erreicht werden.
WIRKUNGEN BEI KURZZEITEXPOSITION
WIRKUNGEN BEI KURZZEITEXPOSITION: Die Substanz ver?tzt die Augen, die Haut und die Atemwege. Inhalation kann zu Lungen?dem führen (siehe ANMERKUNGEN). ?tzend beim Verschlucken. Die Substanz hydrolysiert schnell bei Kontakt mit Feuchtigkeit unter Freisetzung von H_2S: siehe auch ICSC 0165.
LECKAGE
Pers?nliche Schutzausrüstung: Atemschutzger?t mit Partikelfilter entsprechend der Arbeitsplatzkonzentration des Stoffes und Atemschutzger?t mit Filter für organische Gase und D?mpfe entsprechend der Arbeitsplatzkonzentration des Stoffes. Verschüttetes Material in Kunststoff-Beh?ltern sammeln. An sicheren Ort bringen.
R-S?tze Betriebsanweisung:
R31:Entwickelt bei Berührung mit S?ure giftige Gase.
R34:Verursacht Ver?tzungen.
S-S?tze Betriebsanweisung:
S25:Berührung mit den Augen vermeiden.
S36/37/39:Bei der Arbeit geeignete Schutzkleidung,Schutzhandschuhe und Schutzbrille/Gesichtsschutz tragen.
S45:Bei Unfall oder Unwohlsein sofort Arzt zuziehen (wenn m?glich, dieses Etikett vorzeigen).
Chemische Eigenschaften
white crystals or powder with a very unpleasant smell
Verwenden
the copper ore beneficiation,the sulfurous acid dyeing of manmade fibre,the synthesis of organic intermediates,the preparation of auxiliary agent of sulfur dyes,and waste water treatment; raw material to produce ammonium sulphate and ethanethiol
Allgemeine Beschreibung
Sodium hydrosulfide is a colorless to light yellow crystalline solid or fused mass. Sodium hydrosulfide is corrosive to skin and metal. Used in paper pulping, manufacturing dyes, and dehairing hides.
Air & Water Reaktionen
Soluble in water. The solution slowly evolves hydrogen sulfide gas. Crystals hydrolyze in moist air to sodium hydroxide and sodium sulfide. Liable to spontaneous heating in moist air.
Reaktivit?t anzeigen
A chemical base. Reacts with acids to release flammable and toxic gaseous hydrogen sulfide. As long as the solution is kept strongly alkaline, pH > 10, there is very little release of H2S. At pH = 7, the percent concentration of H2S released is close to 80%.
Hazard
Contact with acids causes evolution of toxic
gases.
Health Hazard
Fire will produce irritating, corrosive and/or toxic gases. Inhalation of decomposition products may cause severe injury or death. Contact with substance may cause severe burns to skin and eyes. Runoff from fire control may cause pollution.
Brandgefahr
Flammable/combustible material. May ignite on contact with moist air or moisture. May burn rapidly with flare-burning effect. Some react vigorously or explosively on contact with water. Some may decompose explosively when heated or involved in a fire. May re-ignite after fire is extinguished. Runoff may create fire or explosion hazard. Containers may explode when heated.
Industrielle Verwendung
Sodium hydrosulfide (NaHS) is stable only in solution. When in contact with oxygen
(air), it slowly oxidizes. If a solution of NaHS is heated, it is converted into Na
2S and H
2S.
Sodium hydrosulfide can be used as a replacement for Na
2S·9H
2O during sulfidization
of oxide minerals. Sodium hydrosulfide in solution has a much lower alkalinity than
Na
2S.
Although the performance of NaHS is not the same as for Na2S, it is used because of its
cost-effectiveness.
Sicherheitsprofil
Poison by intraperitoneal and subcutaneous routes. Mutation data reported. A corrosive irritant to skin, eyes, and mucous membranes. Flammable when exposed to heat or flame. Spontaneous combustion. Reacts violently with Qazonium salts. Readily yields HS. When heated to decomposition it emits toxic fumes of SO, and NazO. See also SULFIDES and MERCAPTANS.
Natriumhydrogensulfid Upstream-Materialien And Downstream Produkte
Upstream-Materialien
Downstream Produkte