2-Methylfuran Chemische Eigenschaften,Einsatz,Produktion Methoden
R-S?tze Betriebsanweisung:
R11:Leichtentzündlich.
R23:Giftig beim Einatmen.
R23/24/25:Giftig beim Einatmen, Verschlucken und Berührung mit der Haut.
S-S?tze Betriebsanweisung:
S16:Von Zündquellen fernhalten - Nicht rauchen.
S33:Ma?nahmen gegen elektrostatische Aufladungen treffen.
S45:Bei Unfall oder Unwohlsein sofort Arzt zuziehen (wenn m?glich, dieses Etikett vorzeigen).
S7/9:Beh?lter dicht geschlossen an einem gut gelüfteten Ort aufbewahren.
S9:Beh?lter an einem gut gelüfteten Ort aufbewahren.
Chemische Eigenschaften
2-Methylfuran is a cyclic diene possessing ether-like properties. It is highly reactive with many inorganic and organic compounds yielding a variety of new derivatives which await exploration for the development of commercial applications.
Occurrence
Reported found in cooked beef, bread, butter, chicken, cocoa, coffee, currant, mint, tea and tomato.
Verwenden
2-Methylfuran is a volatile organic compound (VOCs) used as a potential non-intrusive tool for screening of lung cancer.
Allgemeine Beschreibung
A clear colorless liquid with an ethereal odor. Flash point -22°F. Less dense than water and insoluble in water. Hence floats on water. Vapors heavier than air.
Air & Water Reaktionen
Highly flammable. Insoluble in water.
Reaktivit?t anzeigen
2-Methylfuran is incompatible with strong acids and strong bases. May react vigorously with oxidizing materials .
Hazard
Highly flammable, dangerous fire andexplosion risk. Irritant.
Health Hazard
Inhalation or contact with material may irritate or burn skin and eyes. Fire may produce irritating, corrosive and/or toxic gases. Vapors may cause dizziness or suffocation. Runoff from fire control or dilution water may cause pollution.
Sicherheitsprofil
Poison by ingestion.
Moderately toxic by inhalation. An eye
irritant. Mutation data reported. Very
dangerous fire hazard when exposed to heat or flame; can react vigorously with oxidizing
materials. To fight fire, use CO2, dry
chemical. When heated to decomposition it
emits acrid smoke and irritating fumes.
l?uterung methode
Wash it with acidified saturated ferrous sulfate solution (to remove peroxides), separate, dry with CaSO4 or CaCl2, and fractionally distil it from KOH immediately before use. To reduce the possibility of spontaneous polymerisation, addition of about one-third of its volume of heavy mineral oil to 2-methylfuran prior to distillation has been recommended. [Beilstein 17 H 36, 17 I 18, 17 II 39, 17 III/IV 265.]
2-Methylfuran Upstream-Materialien And Downstream Produkte
Upstream-Materialien
Downstream Produkte