2-Methoxy-anilin Chemische Eigenschaften,Einsatz,Produktion Methoden
ERSCHEINUNGSBILD
ROTE BIS GELBE, ?LIGE FLüSSIGKEIT MIT CHARAKTERISTISCHEM GERUCH. VERF?RBT SICH BRAUN BEI KONTAKT MIT LUFT.
CHEMISCHE GEFAHREN
Zersetzung beim Verbrennen unter Bildung giftiger Rauche mit Stickstoffoxiden. Reagiert mit S?uren, S?ureanhydriden, S?urechloriden, Chlorkohlens?ureestern und starken Oxidationsmitteln.
ARBEITSPLATZGRENZWERTE
TLV: 0,5 mg/m?(als TWA); Hautresorption; Krebskategorie A3 (best?tigte krebserzeugende Wirkung beim Tier mit unbekannter Bedeutung für den Menschen); BEI vorhanden; (ACGIH 2005).
MAK: Hautresorption; Krebserzeugend Kategorie 2 (DFG 2006).
AUFNAHMEWEGE
Aufnahme in den K?rper durch Inhalation der D?mpfe über die Haut und durch Verschlucken.
INHALATIONSGEFAHREN
Beim Verdampfen bei 20°C tritt langsam eine gesundheitssch?dliche Kontamination der Luft ein; viel schneller jedoch beim Versprühen oder Dispergieren.
WIRKUNGEN BEI KURZZEITEXPOSITION
WIRKUNGEN BEI KURZZEITEXPOSITION: M?glich sind Auswirkungen auf das Blut mit nachfolgender Meth?moglobinbildung. Die Auswirkungen treten u.U. verz?gert ein. ?rztliche Beobachtung notwendig. (s. Anm.)
WIRKUNGEN NACH WIEDERHOLTER ODER LANGZEITEXPOSITION
M?glicherweise krebserzeugend für den Menschen.
LECKAGE
Ausgelaufene Flüssigkeit m?glichst in abdichtbaren Beh?ltern sammeln. An sicheren Ort bringen. NICHT in die Umwelt gelangen lassen. Pers?nliche Schutzausrüstung: Chemikalienschutzanzug mit umgebungsluftunabh?ngigem Atemschutzger?t.
R-S?tze Betriebsanweisung:
R45:Kann Krebs erzeugen.
R23/24/25:Giftig beim Einatmen, Verschlucken und Berührung mit der Haut.
R68:Irreversibler Schaden m?glich.
S-S?tze Betriebsanweisung:
S53:Exposition vermeiden - vor Gebrauch besondere Anweisungen einholen.
S45:Bei Unfall oder Unwohlsein sofort Arzt zuziehen (wenn m?glich, dieses Etikett vorzeigen).
Aussehen Eigenschaften
C7H9NO, 2-Methoxyanilin, 2-Aminoanisol, 1-Amino-2-methoxybenzol. Gelbliche, aromatisch riechende Flüssigkeit.
Gefahren für Mensch und Umwelt
Als gefährliche Zersetzungsprodukte können nitrose Gase entstehen.
2-Anisidin steht im Verdacht Krebs erzeugen. Es wirkt akut und chronisch als Blut-, Ferment- und Nervengift. Gefahr kummulativer Wirkungen. Es wird durch Atmung, Magen-Darm Trakt und im besonderen durch die Haut aufgenommen. Vergiftungen äußern sich durch Blaufärbung der Haut(Zyanose) und gehen mit Kopfschmerzen, Herzrythmusstörugen, Blutdruckabfall, Atemnot und Krämpfen einher.
Stark wassergefährdender Stoff.
Schutzma?nahmen und Verhaltensregeln
Im Abzug arbeiten und von Zündquellen fernhalten.
Schutzhandschuhe aus Gummi (nur als kurzzeitger Spritzschutz).
Verhalten im Gefahrfall
Ausgelaufene Substanz mit flüssigkeitsbindendem Material (z.B. Sand, Kieselgur, Rench Rapid, Chemisorb) aufnehmen. und in gut verschliessbaren Behältern als Sondermüll entsorgen. Im Brandfall Atemschutzgerät (Filter ABEK) anlegen.
Wasser, Schaum, Kohlendioxid, Löschpulver
#
Erste Hilfe
Nach Hautkontakt: Bei Berührung mit der Haut sofort mit viel lauwarmen Wasser und Seife abwaschen. Mit Polyethylenglycol 400 betroffene Hautstellen abtupfen.
Nach Augenkontakt: Bei Berührung mit den Augen gründlich bei geöffneten Lid mind. 15 Minuten mit viel Wasser spülen. Augenarzt konsultieren.
Nach Einatmen: Für Frischluft sorgen und Arzt konsultieren.
Nach Verschlucken: Sofort Arzt hinzuziehen.
Nach Kleidungskontakt: Benetzte Kleidung sofort ausziehen.
Bei Unwohlsein sofort Arzt hinzuziehen.
Ersthelfer: siehe gesonderten Anschlag
Sachgerechte Entsorgung
Als Sondermüll entsorgen.
Beschreibung
o-Anisidine was produced commercially in the United States
from the 1920s until late 1950s. By 2009, worldwide only six
industries manufactured o-anisidine, but none produced
hydrochloride salt. o-Anisidine was available from 44 suppliers,
including 20 US suppliers, and the hydrochloride salt was
available from eight suppliers, including five US suppliers. US
imports of o-anisidine and its hydrochloride salt are reported in
the category ‘o-anisidines, p-anisidines, and p-phenetidine,’ and
US exports are reported in the category ‘a(chǎn)nisidines, dianisidines,
phenetidines, and their salts.’ From 1989 to 2008,
imports ranged from a high of over 4.6 million kg in 1996 to
zero in 2007 and 2008, and exports ranged from zero to
262 000 kg. Reports filed under the US Environmental
Protection Agency’s (EPA) Toxic Substances Control Act
Inventory Up Rule indicated that United States production plus
imports of o-anisidine totaled 500 000 lb–1 million lb in 1986,
1990, and 2006; 1 million–10 million lb in 1990 and 1998;
and 10 000–500 000 lb in 2002.
Chemische Eigenschaften
Anisidine exists as ortho-, meta-, and paraisomers. They have characteristic amine (fishy) odors.
o-Anisidine (or o-methoxyaniline) is an aromatic amine with a methoxyl group ortho to the amino group of aniline. It is a colorless to yellowish, pink, or reddish liquid.o-Anisidine is soluble in water and mineral oils, and miscible with alcohol, benzene, acetone, and diethylether. o-Anisidine hydrochloride, a salt of o-anisidine, is a grayish crystalline solid or powder at room temperature and is soluble in water (NTP, 2011).
Physikalische Eigenschaften
Colorless, yellow to reddish liquid with an amine-like odor. Becomes brown on exposure to air.
Verwenden
Similar to other aromatic amines, o-anisidine may cause methemglobinemia and cancer in humans. It is used mainly as an intermediate for the production of azo dyes and pigments. Other industrial uses of o-anisidine include synthesis of other dyes and pharmaceuticals, as a corrosion inhibitor for steel, and as an antioxidant for polymercaptan resins (IARC, 1999; HSDB, 2012).
Intermediate for azo dyes and for guaiacol.
Allgemeine Beschreibung
Clear, yellowish to reddish or brown liquid with an amine (fishy) odor.
Air & Water Reaktionen
o-Anisidine darkens on exposure to air. Insoluble in water.
Reaktivit?t anzeigen
o-Anisidine is sensitive to heat. o-Anisidine is also sensitive to exposure to light. o-Anisidine is incompatible with strong oxidizers. o-Anisidine is also incompatible with acids, acid chlorides, acid anhydrides and chloroformates. o-Anisidine will attack some forms of plastics, rubber and coatings. .
Hazard
Strong irritant. Toxic when absorbed
through the skin. Possible carcinogen.
Health Hazard
o-Anisidine was carcinogenic in
experimental animals.
Brandgefahr
o-Anisidine is combustible.
Sicherheitsprofil
Confirmed carcinogen.
Moderately toxic by ingestion. Mutation data
reported. When heated to decomposition it
emits toxic fumes of NOx.
m?gliche Exposition
Anisidines are used in the manufacture
of azo dyes; pharmaceuticals; textile-processing chemicals
Incompatibilities: Incompatible with oxidizers (chlorates,
nitrates, peroxides, permanganates, perchlorates, chlorine,bromine, fluorine, etc.); contact may cause fires or explosions.
Keep away from alkaline materials, strong bases,
strong acids, oxoacids, epoxides. Attacks some coatings
and some forms of plastic and rubber.
Carcinogenicity
o-Anisidine is reasonably anticipated to be a human carcinogen based on sufficient evidence of carcinogenicity in experimental animals.
Environmental Fate
Biological. o-Anisidine should be biodegradable according to OECD guidelines (Brown and
Labouerer (1983).
Chemical/Physical. At influent concentrations (pH 3.0) of 10, 1.0, 0.1, and 0.01 mg/L, the GAC
adsorption capacities were 52, 20, 7.8, and 3.0 mg/g, respectively. At pHs 7 and 9, the GAC
adsorption capacities were 110, 50, 23, and 10 mg/g at influent concentrations of 10, 1.0, 0.1, and
0.01 mg/L, respectively (Dobbs and Cohen, 1980).
Versand/Shipping
UN2431 Anisidines, Hazard Class: 6.1; Labels:
6.1-Poisonous materials
l?uterung methode
It is separated from the m-and p-isomers by steam distillation. It is also separated from its usual synthetic precursor o-nitroanisole by dissolving it in dilute HCl (pH <2.0) extracting the nitro impurity with Et2O, adjusting the pH to ~8.0 with NaOH, extracting the amine into Et2O or steam distilling. Extract the distillate with Et2O, dry the extract (Na2SO4), filter, evaporate and fractionate the residual oil. Protect the almost colourless oil from light which turns it yellow in color. [Biggs & Robinson J Chem Soc 3881961, Nodzu et al. Yakugaku Zasshi (J Pharm Soc Japan) 71 713, 715 1951, Beilstein 13 IV 806.]
Waste disposal
Dissolve in combustible solvent
(alcohols, benzene, etc.) and spray solution into furnace
equipped with afterburner and scrubber, or burn spill
residue on sand and soda ash absorbent in a furnace.
2-Methoxy-anilin Upstream-Materialien And Downstream Produkte
Upstream-Materialien
Downstream Produkte
2-Methoxybenzonitril
6-Brom-3-(o-hydroxyphenylaminocarbonyl)-2-naphthylphosphat
Benzoesure, 2-[[1-Amino-7-[[4-[[6-amino-5-[(3-carboxy-4-hydroxyphenyl)azo]-1-hydroxy-3-sulfo-2-naphthalinyl]azo]-2-methoxyphenyl]azo]-8-hydroxy-3,6-disulfo-2-naphthalinyl]azo]-5-[[6-amino-5-[(3-carboxy-4-hydroxyphenyl)azo]-1-hydroxy-3-sulfo-2-naphthalinyl]azo]-
METOXADIAZONE
N-(2-Methoxyphenyl)acetamid
3,8-DIMETHYL-1,10-PHENANTHROLINE
2-Methoxy-4-nitroanilin
3-Hydroxy-2'-methoxy-2-naphthanilid
4-AMINO-3-METHOXYPHENYLBORONIC ACID, PINACOL ESTER
1-(2-Methoxyphenyl)piperazine hydrobromide
N-(2-Methoxy-4-nitrophenyl)acetamid
2-Methoxyphenylisocyanat
5-(N,N-Diethylaminosulfonyl)-2-methoxybenzoldiazoniumchlorid
Reactive Yellow KE-4RN
2-Methoxyphenol
2-Fluoranisol
3,4-DIHYDRO-8-HYDROXY-4-OXOQUINOLINE-3-CARBOXYLIC ACID
2-Methoxy-4-nitrobenzoldiazonium
2-Methoxy-5-nitrobenzoldiazonium
Benzoesure, 5-[(4-Aminophenyl)azo]-2-hydroxy-, Reaktionsprodukte mit 3-[(4-Amino-3-methoxyphenyl)azo]benzolsulfonsure und Kohlendichlorid, Natriumsalze
2-Methoxythiophenol
4-[[2-Methoxy-4-[(4-nitrophenyl)azo]phenyl]azo]phenol
N-(2-Methylphenyl)-3-oxo-butans?ureamid
5-Chlor-o-anisidin
N-(4-AMINO-2-METHOXYPHENYL)ACETAMIDE
5'-Chlor-3-hydroxy-2'-methoxy-2-naphthanilid
4-HYDROXY-8-METHOXYQUINOLINE-3-CARBOXYLIC ACID
2'-Methoxyacetoacetanilid
4,8-Dihydroxychinolin-2-carbonsure
Dinatrium-3,3'-[carbonylbis[imino(3-methoxy-4,1-phenylen)azo]]dibenzoat
Vanillin
3-Amino-N,N-diethyl-4-methoxyben-zolsulfonamid
5-BROMO-8-METHOXY-2-METHYL-QUINOLINE
1-(2-Methoxyphenyl)piperazin
4-HYDROXY-8-METHOXY-QUINOLINE-3-CARBOXYLIC ACID ETHYL ESTER