成人免费xx,国产又黄又湿又刺激不卡网站,成人性视频app菠萝网站,色天天天天

ChemicalBook >> journal list >> Membranes >>article
Membranes

Membranes

IF: 3.29
Download PDF

Feasibility of Poly (Vinyl Alcohol)/Poly (Diallyldimethylammonium Chloride) Polymeric Network Hydrogel as Draw Solute for Forward Osmosis Process.

Published:3 November 2022 DOI: 10.3390/membranes12111097 PMID: 36363652
Ananya Bardhan, Senthilmurugan Subbiah, Kaustubha Mohanty, Ibrar Ibrar, Ali Altaee

Abstract

Forward osmosis (FO) has been identified as an emerging technology for the concentration and crystallization of aqueous solutions at low temperatures. However, the application of the FO process has been limited due to the unavailability of a suitable draw solute. An ideal draw solute should be able to generate high osmotic pressure and must be easily regenerated with less reverse solute flux (RSF). Recently, hydrogels have attracted attention as a draw solution due to their high capacity to absorb water and low RSF. This study explores a poly (vinyl alcohol)/poly (diallyldimethylammonium chloride) (PVA-polyDADMAC) polymeric network hydrogel as a draw solute in forward osmosis. A low-pressure reverse osmosis (RO) membrane was used in the FO process to study the performance of the hydrogel prepared in this study as a draw solution. The robust and straightforward gel synthesis method provides an extensive-scale application. The results indicate that incorporating cationic polyelectrolyte poly (diallyldimethylammonium chloride) into the polymeric network increases swelling capacity and osmotic pressure, thereby resulting in an average water flux of the PVA-polyDADMAC hydrogel (0.97 L m?2 h?1) that was 7.47 times higher than the PVA hydrogel during a 6 h FO process against a 5000 mg L?1 NaCl solution (as a feed solution). The effect of polymer and cross-linker composition on swelling capacity was studied to optimize the synthesized hydrogel composition. At 50 °C, the hydrogel releases nearly >70% of the water absorbed during the FO process at room temperatures, and water flux can be recovered by up to 86.6% of the initial flux after 12 hydrogel (draw solute) regenerations. Furthermore, this study suggests that incorporating cationic polyelectrolytes into the polymeric network enhances FO performances and lowers the actual energy requirements for (draw solute) regeneration. This study represents a significant step toward the commercial implementation of a hydrogel-driven FO system for the concentration of liquid-food extract.

Substances (3)

Related products
Procduct Name CAS Molecular Formula Supplier Price
Sodium chloride 7647-14-5 ClNa 1214 suppliers $5.00-$6678.62
Poly(diallyldimethylammonium chloride) 26062-79-3 C24H54Cl3N3X2 309 suppliers $25.00-$187.00
Poly(vinyl alcohol) 25213-24-5 C6H10O3 91 suppliers $40.50-$136.00

Similar articles

IF:14.4

Poly-L-cysteine

Journal of the American Chemical Society Arieh Berger, Junzo Noguchi,etc Published: 1 September 1956
IF:2.5

Synthesis and Properties of Shape Memory Poly(γ-Benzyl-l-Glutamate)-b-Poly(Propylene Glycol)-b-Poly(γ-Benzyl-l-Glutamate)

Applied Sciences-Basel Lin Gu,?Yuanzhang Jiang,etc Published: 4 December 2017