2-Brom-2-methylpropan Chemische Eigenschaften,Einsatz,Produktion Methoden
R-S?tze Betriebsanweisung:
R11:Leichtentzündlich.
R36/37/38:Reizt die Augen, die Atmungsorgane und die Haut.
S-S?tze Betriebsanweisung:
S16:Von Zündquellen fernhalten - Nicht rauchen.
S33:Ma?nahmen gegen elektrostatische Aufladungen treffen.
S37/39:Bei der Arbeit geeignete Schutzhandschuhe und Schutzbrille/Gesichtsschutz tragen.
S26:Bei Berührung mit den Augen sofort gründlich mit Wasser abspülen und Arzt konsultieren.
Aussehen Eigenschaften
C4H9Br. Stabilisiert mit Kaliumcarbonat. Farblose Flüssigkeit mit aromatischem Geruch.
Gefahren für Mensch und Umwelt
Leicht entzündlich. Im Brandfall kann Bromwasserstoff entstehen.
Schutzma?nahmen und Verhaltensregeln
Schutzhandschuhe als kurzzeitiger Spritzschutz.
Verhalten im Gefahrfall
Mit flüssigkeitsbindendem Material, z. B. Rench Rapid aufnehmen. Der Entsorgung zuführen. Nachreinigen.
Kohlendioxid, Pulver, Schaum.
Brennbar. Im Brandfall Entstehung von Bromwasserstoff möglich.
Erste Hilfe
Nach Hautkontakt: Mit reichlich Wasser abwaschen.
Nach Augenkontakt: Mit reichlich Wasser und geöffnetem Lidspalt mindestens 10 Minuten ausspülen. Augenarzt hinzuziehen.
Nach Einatmen: Frischluft.
Nach Verschlucken: Reichlich Wasser trinken, Erbrechen auslösen. Sofort Arzt hinzuziehen.
Nach Kleidungskontakt: Kontaminierte Kleidung sofort entfernen.
Ersthelfer: siehe gesonderten Anschlag
Sachgerechte Entsorgung
Als halogenhaltige, organische Lösemittelabfälle.
Chemische Eigenschaften
CLEAR COLOURLESS TO YELLOW-BROWN LIQUID
Verwenden
2-Bromo-2-methylpropane was used to study the massive deadenylation of adenine based-nucleosides induced by halogenated alkanes under physiological conditions.
Allgemeine Beschreibung
A colorless liquid. Slightly denser than water and insoluble in water. Flash point between 64 - 73°F. Harmful if inhaled.
Air & Water Reaktionen
Highly flammable. Insoluble in water.
Reaktivit?t anzeigen
Halogenated aliphatic compounds, such as BROMOMETHYLPROPANE, are moderately or very reactive. Reactivity generally decreases with increased degree of substitution of halogen for hydrogen atoms. Low molecular weight haloalkanes are highly flammable and can react with some metals to form dangerous products. Materials in this group are incompatible with strong oxidizing and reducing agents. Also, they are incompatible with many amines, nitrides, azo/diazo compounds, alkali metals, and epoxides. Burning generates toxic fumes of bromine.
Health Hazard
May cause toxic effects if inhaled or absorbed through skin. Inhalation or contact with material may irritate or burn skin and eyes. Fire will produce irritating, corrosive and/or toxic gases. Vapors may cause dizziness or suffocation. Runoff from fire control or dilution water may cause pollution.
Brandgefahr
HIGHLY FLAMMABLE: Will be easily ignited by heat, sparks or flames. Vapors may form explosive mixtures with air. Vapors may travel to source of ignition and flash back. Most vapors are heavier than air. They will spread along ground and collect in low or confined areas (sewers, basements, tanks). Vapor explosion hazard indoors, outdoors or in sewers. Runoff to sewer may create fire or explosion hazard. Containers may explode when heated. Many liquids are lighter than water.
Sicherheitsprofil
Moderately toxic by
intraperitoneal route. Questionable
carcinogen with experimental
neoplastigenic data. When heated to
decomposition it emits toxic fumes of BrSee also BROMIDES.
l?uterung methode
Neutralise the bromomethylpropane with K2CO3, distil, and dry it using molecular sieves (5A), then distil it in a vacuum and degas it by the freeze-pump-thaw technique. Seal it under vacuum. [Beilstein 1 IV 295.]
2-Brom-2-methylpropan Upstream-Materialien And Downstream Produkte
Upstream-Materialien
Downstream Produkte