POLYDIMETHYLSILOXANE Chemische Eigenschaften,Einsatz,Produktion Methoden
R-S?tze Betriebsanweisung:
R36/37:Reizt die Augen und die Atmungsorgane.
R20:Gesundheitssch?dlich beim Einatmen.
S-S?tze Betriebsanweisung:
S26:Bei Berührung mit den Augen sofort gründlich mit Wasser abspülen und Arzt konsultieren.
S36:DE: Bei der Arbeit geeignete Schutzkleidung tragen.
S23:Gas/Rauch/Dampf/Aerosol nicht einatmen(geeignete Bezeichnung(en) vom Hersteller anzugeben).
Chemische Eigenschaften
The PhEur 6.0 and USP 32 describe simethicone as a mixture of
fully methylated linear siloxane polymers containing repeating units
of the formula [–(CH3)2SiO–]n, stabilized with trimethylsiloxy endblocking
units of the formula [(CH3)3 SiO–], and silicon dioxide. It
contains not less than 90.5% and not more than 99.0% of the
polydimethylsiloxane [–(CH3)2SiO–]n, and not less than 4.0% and not more than 7.0% of silicon dioxide. The PhEur 6.0 additionally
states that the degree of polymerization is between 20–400.
Simethicone occurs as a translucent, gray-colored, viscous fluid.
It has a molecular weight of 14 000–21 000.
Verwenden
Simethicone is an oral anti-foaming agent used to reduce bloating, discomfort and pain caused by excess gas in the stomach or intestinal tract. Simethicone is a mixture of polydimethylsiloxane and hydrated silica gel.
Vorbereitung Methode
Silicon dioxide is initially rendered hydrophobic in one of a variety
of proprietary processes specific to a particular manufacturer. It is
then slowly mixed with the silicone fluids in a formulation. After
mixing, the simethicone is milled to ensure uniformity.
Allgemeine Beschreibung
Antifoam A Concentrate is an extremely effective foam suppressor for aqueous and non-aqueous systems. It is 100% active silicone polymer. No emulsifiers are present. Antifoam A Concentrate is typically effective at 1-100 ppm. Antifoam A Concentrate should be diluted with 3-10 parts of propylene glycol (aqueous) or vegetable oil (nonaqueous) with slow mixing. The product will be stable in the pH range of 5 to 9. Antifoam A Concentrate can be added directly to a fermentation medium, but it is not recommended that it be pumped to a fermenter on an as-needed basis.
Pharmazeutische Anwendungen
The main use of simethicone as an excipient is as an antifoaming
agent in pharmaceutical manufacturing processes, for which
1–50 ppm is used.
Therapeutically, simethicone is included in a number of oral
pharmaceutical formulations as an antiflatulent, although its
therapeutic benefit is questionable. It is also included in antacid
products such as tablets or capsules. In some types of surgical or
gastroscopic procedures where gas is used to inflate the body cavity,
a defoaming preparation containing simethicone may be used in the
area to control foaming of the fluids.
When simethicone is used in aqueous formulations, it should be
emulsified to ensure compatibility with the aqueous system and
components.
In the USA, up to 10 ppm of simethicone may be used in food
products.
Sicherheit(Safety)
Simethicone is used in cosmetics, foods, and oral and topical
pharmaceutical formulations, and is generally regarded as a
relatively nontoxic and nonirritant material when used as an
excipient. Direct contact with the eye may cause irritation.
Therapeutically, oral doses of 125–250mg of simethicone, three
or four times daily, have been given as an antiflatulent. Doses of
20–40 mg of simethicone have been given with feeds to relieve colic
in infants.
LD50 (dog, IV): 0.9 g/kg
Lager
Simethicone is generally regarded as a stable material when stored
in the original unopened container. A shelf-life of 18 months from
the date of manufacture is typical. However, some simethicone
products have a tendency for the silicon dioxide to settle slightly and
containers of simethicone should therefore be shaken thoroughly to
ensure uniformity of contents before sampling or use. Simethicone
should be stored in a cool, dry, location away from oxidizing
materials.
Simethicone can be sterilized by dry heating or autoclaving. With
dry heating, a minimum of 4 hours at 160℃ is required.
Inkompatibilit?ten
Simethicone as supplied is not generally compatible with aqueous
systems and will float like an oil on a formulation unless it is first
emulsified. It should not be used in formulations or processing
conditions that are very acidic (below pH 3) or highly alkaline
(above pH 10), since these conditions may have some tendency to
break the polydimethylsiloxane polymer. Simethicone cannot
normally be mixed with polar solvents of any kind because it is
very minimally soluble. Simethicone is incompatible with oxidizing
agents.
Regulatory Status
GRAS listed. Included in the FDA Inactive Ingredients Database
(oral emulsions, powders, solutions, suspensions, tablets; and rectal
and topical preparations). Included in nonparenteral medicines
licensed in the UK.
POLYDIMETHYLSILOXANE Upstream-Materialien And Downstream Produkte
Upstream-Materialien
Downstream Produkte
