Nitrosylschwefelsure Chemische Eigenschaften,Einsatz,Produktion Methoden
R-S?tze Betriebsanweisung:
R8:Feuergefahr bei Berührung mit brennbaren Stoffen.
R14:Reagiert heftig mit Wasser.
R23/24/25:Giftig beim Einatmen, Verschlucken und Berührung mit der Haut.
R35:Verursacht schwere Ver?tzungen.
R34:Verursacht Ver?tzungen.
S-S?tze Betriebsanweisung:
S17:Von brennbaren Stoffen fernhalten.
S26:Bei Berührung mit den Augen sofort gründlich mit Wasser abspülen und Arzt konsultieren.
S36/37/39:Bei der Arbeit geeignete Schutzkleidung,Schutzhandschuhe und Schutzbrille/Gesichtsschutz tragen.
S45:Bei Unfall oder Unwohlsein sofort Arzt zuziehen (wenn m?glich, dieses Etikett vorzeigen).
S27:Beschmutzte, getr?nkte Kleidung sofort ausziehen.
Chemische Eigenschaften
Nitrosylsulfuric acid, HNO
5S, is a straw-colored, oily liquid furnished as a 40% solution in 87% sulfuric acid,and stable at room temperature. It is used as a diazotizing agent for dyes,chemical intermediate, drugs and pharmaceuticals.
Physikalische Eigenschaften
Nitrosylsulfuric acid is produced as an intermediate in the manufacture of sulfuric acid using the lead chamber process by the reaction of sulfur dioxide, nitrogen dioxide, oxygen, and water.
Nitrosylsulfuric acid also is made from absorption of nitrogen oxides (NO
x) in oleum (fuming sulfuric acid):
N
2O
3 + 2H
2SO
4 → 2ONSO
4 + H
2O
or by the reaction of nitrosyl chloride with concentrated sulfuric acid:
ClNO + H
2SO
4 → ONSO
4 + HCl
Another method of preparation involves the reaction of nitrosyl bromide with silver bisulfate:
AgHSO
4 + BrNO → ONHSO
4 + AgBr
In making disperse azo dyes, nitrosylsulfuric acid is produced by the addition of sodium nitrite, NaNO
2, to concentrated sulfuric acid (1g NaNO
2 per 13 g H
2SO
4).
Verwenden
Nitrosylsulfuric acid is used for diazotisation, nitrosation, oxidation and oximation reactions. Product Data Sheet
Allgemeine Beschreibung
Shipped in solution with sulfuric acid (solutions are usually 40% Nitrosylsulfuric acid and 54% sulfuric acid (Hawley)). Solution is a straw-colored oily liquid with a sharp odor. When pure, a crystalline solid decomposing at 73°C. Very irritating to skin and eyes. Used to make dyes and other chemicals.
Reaktivit?t anzeigen
Nitrosylsulfuric acid is an oxidizing agent. Neutralizes chemical bases in exothermic reactions. An attempt to diazotize dinitroaniline using Nitrosylsulfuric acid resulted in an explosion with loss of life. The event was blamed on the high concentration of the reactants dinitroaniline hydrochloride and Nitrosylsulfuric acid [MCA Case History 1763. 1971].
Hazard
Strong irritant to skin and mucous membranes.
Health Hazard
TOXIC; inhalation, ingestion or contact (skin, eyes) with vapors, dusts or substance may cause severe injury, burns or death. Reaction with water or moist air will release toxic, corrosive or flammable gases. Reaction with water may generate much heat that will increase the concentration of fumes in the air. Fire will produce irritating, corrosive and/or toxic gases. Runoff from fire control or dilution water may be corrosive and/or toxic and cause pollution.
Brandgefahr
Non-combustible, substance itself does not burn but may decompose upon heating to produce corrosive and/or toxic fumes. Vapors may accumulate in confined areas (basement, tanks, hopper/tank cars etc.). Substance will react with water (some violently), releasing corrosive and/or toxic gases and runoff. Contact with metals may evolve flammable hydrogen gas. Containers may explode when heated or if contaminated with water.
Sicherheitsprofil
A poison. A corrosive
irritant to skin, eyes, and mucous
membranes. Explosive reaction above 50°C
with 2-chloro-4,6-dinitroaniline and 4-
chloro-2,6-d1nitroalne. Potentially
explosive reaction with dmitroaniline. When
heated to decomposition it emits toxic
fumes of SOx and NOx. See also
SULFATES and NITRATES.
Nitrosylschwefelsure Upstream-Materialien And Downstream Produkte
Upstream-Materialien
Downstream Produkte
