成人免费xx,国产又黄又湿又刺激不卡网站,成人性视频app菠萝网站,色天天天天

Welcome to chemicalbook!
Chinese English Japanese Germany Korea
400-158-6606
Try our best to find the right business for you.
Do not miss inquiry messages Please log in to view all inquiry messages.

Welcome back!

ChemicalBook CAS DataBase List (R)-3-amino-1-butanol
61477-40-5

(R)-3-amino-1-butanol synthesis

6synthesis methods
Release of (R)-3-amino-1-butanol From the (S)-mandelic Salt Thereof; The (S)-mandelic salt of (R)-3-amino-1-butanol obtained in Example 1.1 (372 g, 1.54 mol) was suspended in triethanolamine (1 I) at 80° C., and the slurry was admixed with sodium methoxide (277.6 g, 1.54 mol; 30% in methanol), which gave a clear solution. This was heated to 100° C. and vacuum was applied. In a stepwise manner, a pressure of 750, 500, 250, 100, 50 and finally 20 mbar was applied. Through an attached Claisen distillation head (no return stream, no column), a clear distillate distilled over at a top temperature of 50 to 60° C., which was predominantly methanol. The pressure was then lowered further to 5 mbar, and (R)-3-amino-1-butanol distilled over at a top temperature of 76° C. The product was distilled once again in a water jet pump vacuum, in the course of which (R)-3-amino-1-butanol distilled over at 93° C. and 26 mbar. This gave 125 g (91% of theory) of (R)-3-amino-1-butanol as a colorless liquid with an optical purity of 99.6% ee.The optical purity of (R)-3-amino-1-butanol was determined by means of GC. To this end, (R)-3-amino-1-butanol (200 mg) and triethylamine (300 mg) were dissolved in diethyl ether (15 ml) and admixed with trifluoroacetic anhydride (0.6 ml). After stirring for 30 minutes, saturated ammonium chloride solution (5 ml) was added and the mixture was stirred for a further 15 minutes. Subsequently, the mixture was left to stand until two phases had formed, and a sample of the upper clear phase was analyzed by GC.Column: Hydrodex-TBDAc, 25 m×0.25 mm, Macherey & NagelInlet temperature: 250° C.Detector temperature: 250° C.Injection volume : 0.5 μlMode: SplitSplit ratio: 100:1Carrier gas: HeFlow: 0.8 ml/min (constant flow)Program:Initial temperature: 135° C.Initial time: 10 minRate: 5° C./minFinal temperature: 170° C.Final time: 35 minRetention times:R enantiomer: 17.68 min (N-trifluoroacylated) 21.23 min (N,O-bis-trifluoroacylated)S enantiomer: 18.24 min (N-trifluoroacylated) 20.11 min (N,O-bis-trifluoroacylated)61477-40-5.png
-

Yield:61477-40-5 96%

Reaction Conditions:

with palladium 10% on activated carbon;hydrogen in ethanol at 50 - 60; under 3000.3 - 4500.45 Torr;

Steps:

4 Example 4: Synthesis of (R) -3-aminobutanol

Put 50g (R) -3-benzyloxyamidobutanol in a clean four-necked bottle, add 200ML ethanol, 2.5g10wt% Pd / C, heat up to 50 60 , hydrogen pressure 0.4 0.6MPa, react until the raw materials disappear . After filtration, the filtrate was concentrated under reduced pressure to obtain an oily substance (R) -3-aminobutanol. Yield: 96.0%, purity 99.7%, ee: 99.9%.

References:

CN110683960,2020,A Location in patent:Paragraph 0051; 0052

(R)-3-amino-1-butanol Related Search: