BISPHENOL A DIGLYCIDYL ETHER RESIN
Product identifier
- Product name: BISPHENOL A DIGLYCIDYL ETHER RESIN
- CBnumber: CB3749115
- CAS: 1675-54-3
- EINECS Number: 216-823-5
- Synonyms: DGEBA,BISPHENOL A DIGLYCIDYL ETHER RESIN
Relevant identified uses of the substance or mixture and uses advised against
- Relevant identified uses: For R&D use only. Not for medicinal, household or other use.
- Uses advised against: none
Company Identification
- Company: Chemicalbook
- Address: Building 1, Huihuang International, Shangdi 10th Street, Haidian District, Beijing
- Telephone: 400-158-6606
Classification of the substance or mixture
Skin irritation, Category 2
Eye irritation, Category 2
Skin sensitization, Category 1
Label elements
Pictogram(s)
- Signal wordWarning
H315 Causes skin irritation
H317 May cause an allergic skin reaction
H319 Causes serious eye irritation
P261 Avoid breathing dust/fume/gas/mist/vapours/spray.
P264 Wash hands thoroughly after handling.
P264 Wash skin thouroughly after handling.
P272 Contaminated work clothing should not be allowed out of the workplace.
P280 Wear protective gloves/protective clothing/eye protection/face protection.
P321 Specific treatment (see … on this label).
P305+P351+P338 IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continuerinsing.
P333+P313 IF SKIN irritation or rash occurs: Get medical advice/attention.
P501 Dispose of contents/container to..…
P264 Wash ... thoroughly after handling.
P280 Wear protective gloves/protective clothing/eye protection/face protection/hearing protection/...
P261 Avoid breathing dust/fume/gas/mist/vapours/spray.
P272 Contaminated work clothing should not be allowed out of the workplace.
P302+P352 IF ON SKIN: Wash with plenty of water/...
P321 Specific treatment (see ... on this label).
P332+P317 If skin irritation occurs: Get medical help.
P362+P364 Take off contaminated clothing and wash it before reuse.
P305+P351+P338 IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
P333+P317 If skin irritation or rash occurs: Get medical help.
none
P501 Dispose of contents/container to an appropriate treatment and disposal facility in accordance with applicable laws and regulations, and product characteristics at time of disposal.
Other hazards
no data available
Substance
- Product name: BISPHENOL A DIGLYCIDYL ETHER RESIN
- Synonyms: DGEBA,BISPHENOL A DIGLYCIDYL ETHER RESIN
- CAS: 1675-54-3
- EC number: 216-823-5
- MF: C21H24O4
- MW: 340.41
Description of first aid measures
If inhaledFresh air, rest. Refer for medical attention.
Remove contaminated clothes. Rinse and then wash skin with water and soap.
First rinse with plenty of water for several minutes (remove contact lenses if easily possible), then refer for medical attention.
Rinse mouth. Give one or two glasses of water to drink. Refer for medical attention .
Most important symptoms and effects, both acute and delayed
Contact with liquid irritates eyes. Prolonged or repeated contact with skin causes irritation and dermatitis. (USCG, 1999)
Indication of any immediate medical attention and special treatment needed
Measures following skin contact should include thorough cleansing with soap and water, followed by a waterless hand cleanser when absolutely necessary. The use of solvents may promote epidermal penetration of materials that would otherwise not penetrate the skin. Epoxy resins
Extinguishing media
Since solvent curing agents /of epoxy resins/ are flammable liquids, fire hydrants & control measures are required. ... Fire extinguishers should be located in area. Epoxy resins
Specific Hazards Arising from the Chemical
This chemical is probably combustible. (NTP, 1992)
Advice for firefighters
Use water spray, powder, foam, carbon dioxide.
NFPA 704
| HEALTH | 3 | Short exposure could cause serious temporary or moderate residual injury (e.g. liquid hydrogen, sulfuric acid, calcium hypochlorite, hexafluorosilicic acid) | |
| FIRE | 1 | Materials that require considerable preheating, under all ambient temperature conditions, before ignition and combustion can occur. Includes some finely divided suspended solids that do not require heating before ignition can occur. Flash point at or above 93.3 °C (200 °F). (e.g. mineral oil, ammonia) | |
| REACT | 0 | Normally stable, even under fire exposure conditions, and is not reactive with water (e.g. helium,N2) | |
| SPEC. HAZ. |
Personal precautions, protective equipment and emergency procedures
Personal protection: filter respirator for organic gases and vapours adapted to the airborne concentration of the substance. Ventilation. Collect leaking and spilled liquid in sealable containers as far as possible. Wash away remainder with plenty of water.
Environmental precautions
Personal protection: filter respirator for organic gases and vapours adapted to the airborne concentration of the substance. Ventilation. Collect leaking and spilled liquid in sealable containers as far as possible. Wash away remainder with plenty of water.
Methods and materials for containment and cleaning up
Ventilation. Collect leaking and spilled liquid in sealable containers as far as possible. Wash away remainder with plenty of water. Personal protection: filter respirator for organic gases and vapors.
Precautions for safe handling
NO open flames. Handling in a well ventilated place. Wear suitable protective clothing. Avoid contact with skin and eyes. Avoid formation of dust and aerosols. Use non-sparking tools. Prevent fire caused by electrostatic discharge steam.
Conditions for safe storage, including any incompatibilities
Separated from strong oxidants.Safety cans should be used for storing flammable solvents. Epoxy resins
Control parameters
Occupational Exposure limit valuesMAK: skin absorption (H); sensitization of skin (SH); carcinogen category: 3A
no data available
Exposure controls
Ensure adequate ventilation. Handle in accordance with good industrial hygiene and safety practice. Set up emergency exits and the risk-elimination area.
Individual protection measures
Eye/face protectionWear safety goggles or eye protection in combination with breathing protection.
Protective gloves.
Use local exhaust or breathing protection.
no data available
Information on basic physicochemical properties
- Physical stateviscous liquid
- ColourWhite
- Odour
Odorless
- Melting point/freezing point
275°C(dec.)(lit.)
- Boiling point or initial boiling point and boiling range
210°C/1mmHg(lit.)
- Flammability
Combustible.
- Lower and upper explosion limit/flammability limit
Combustible
- Flash point
132°C(lit.)
- Auto-ignition temperature
no data available
- Decomposition temperature
no data available
- pH
no data available
- Kinematic viscosity
no data available
- SolubilitySoluble in DMSO (up to 30 mg/ml) or in Ethanol (up to 15 mg/ml)
- Partition coefficient n-octanol/water
log Kow = 3.84 (est)
- Vapour pressure
3.66E-09mmHg at 25°C
- Density and/or relative density
1.17 g/cm3
- Relative vapour density
(air = 1): 11.7
- Particle characteristics
no data available
Reactivity
The substance can presumably form explosive peroxides. Reacts with strong oxidants.
Chemical stability
Volatility of uncured epoxy resins is not great.
Possibility of hazardous reactions
BISPHENOL A DIGLYCIDYL ETHER, is not highly reactive. Ethers can act as bases. They form salts with strong acids and addition complexes with Lewis acids. The complex between diethyl ether and boron trifluoride is an example. Ethers may react violently with strong oxidizing agents. In other reactions, which typically involve the breaking of the carbon-oxygen bond, ethers are relatively inert.
Conditions to avoid
no data available
Incompatible materials
Reacts with strong oxidants.
Hazardous decomposition products
When heated to decomposition it emits acrid smoke and irritating fumes.
Acute toxicity
- Oral: LD50 Rat oral 11,300 uL/kg
- Inhalation: no data available
- Dermal: no data available
Skin corrosion/irritation
no data available
Serious eye damage/irritation
no data available
Respiratory or skin sensitization
no data available
Germ cell mutagenicity
no data available
Carcinogenicity
Evaluation: No epidemiological data relevant to the carcinogenicity of bisphenol A diglycidyl ether were available. There is limited evidence in experimental animals for the carcinogenicity of bisphenol A diglycidyl ether. Overall evaluation: Bisphenol A diglycidyl ether is not classifiable as to its carcinogenicity to humans (Group 3).
Reproductive toxicity
no data available
STOT-single exposure
The substance is irritating to the eyes and skin. Exposure could cause lowering of consciousness.
STOT-repeated exposure
Repeated or prolonged contact with skin may cause dermatitis. Repeated or prolonged contact may cause skin sensitization.
Aspiration hazard
No indication can be given about the rate at which a harmful concentration of this substance in the air is reached on evaporation at 20°C.
Toxicity
- Toxicity to fish: no data available
- Toxicity to daphnia and other aquatic invertebrates: no data available
- Toxicity to algae: no data available
- Toxicity to microorganisms: no data available
Persistence and degradability
no data available
Bioaccumulative potential
An estimated BCF of 180 was calculated for bisphenol A diglycidyl ether(SRC), using an estimated log Kow of 3.8(1) and a regression-derived equation(2). According to a classification scheme(3), this BCF suggests the potential for bioconcentration in aquatic organisms is high(SRC), provided the compound is not metabolized by the organism(SRC).
Mobility in soil
Using a structure estimation method based on molecular connectivity indices(1), the Koc of bisphenol A diglycidyl ether can be estimated to be 1800(SRC). According to a classification scheme(2), this estimated Koc value suggests that bisphenol A diglycidyl ether is expected to have low mobility in soil(SRC).
Other adverse effects
no data available
Disposal methods
ProductThe material can be disposed of by removal to a licensed chemical destruction plant or by controlled incineration with flue gas scrubbing. Do not contaminate water, foodstuffs, feed or seed by storage or disposal. Do not discharge to sewer systems.
Containers can be triply rinsed (or equivalent) and offered for recycling or reconditioning. Alternatively, the packaging can be punctured to make it unusable for other purposes and then be disposed of in a sanitary landfill. Controlled incineration with flue gas scrubbing is possible for combustible packaging materials.
UN Number
ADR/RID: Not dangerous goods. (For reference only, please check.)
IMDG: Not dangerous goods. (For reference only, please check.)
IATA: Not dangerous goods. (For reference only, please check.)
UN Proper Shipping Name
ADR/RID: Not dangerous goods. (For reference only, please check.)
IMDG: Not dangerous goods. (For reference only, please check.)
IATA: Not dangerous goods. (For reference only, please check.)
Transport hazard class(es)
ADR/RID: Not dangerous goods. (For reference only, please check.)
IMDG: Not dangerous goods. (For reference only, please check.)
IATA: Not dangerous goods. (For reference only, please check.)
Packing group, if applicable
ADR/RID: Not dangerous goods. (For reference only, please check.)
IMDG: Not dangerous goods. (For reference only, please check.)
IATA: Not dangerous goods. (For reference only, please check.)
Environmental hazards
ADR/RID: No
IMDG: No
IATA: No
Special precautions for user
no data available
Transport in bulk according to IMO instruments
no data available
Safety, health and environmental regulations specific for the product in question
European Inventory of Existing Commercial Chemical Substances (EINECS)Abbreviations and acronyms
- CAS: Chemical Abstracts Service
- ADR: European Agreement concerning the International Carriage of Dangerous Goods by Road
- RID: Regulation concerning the International Carriage of Dangerous Goods by Rail
- IMDG: International Maritime Dangerous Goods
- IATA: International Air Transportation Association
- TWA: Time Weighted Average
- STEL: Short term exposure limit
- LC50: Lethal Concentration 50%
- LD50: Lethal Dose 50%
- EC50: Effective Concentration 50%
References
- IPCS - The International Chemical Safety Cards (ICSC), website: http://www.ilo.org/dyn/icsc/showcard.home
- HSDB - Hazardous Substances Data Bank, website: https://toxnet.nlm.nih.gov/newtoxnet/hsdb.htm
- IARC - International Agency for Research on Cancer, website: http://www.iarc.fr/
- eChemPortal - The Global Portal to Information on Chemical Substances by OECD, website: http://www.echemportal.org/echemportal/index?pageID=0&request_locale=en
- CAMEO Chemicals, website: http://cameochemicals.noaa.gov/search/simple
- ChemIDplus, website: http://chem.sis.nlm.nih.gov/chemidplus/chemidlite.jsp
- ERG - Emergency Response Guidebook by U.S. Department of Transportation, website: http://www.phmsa.dot.gov/hazmat/library/erg
- Germany GESTIS-database on hazard substance, website: http://www.dguv.de/ifa/gestis/gestis-stoffdatenbank/index-2.jsp
- ECHA - European Chemicals Agency, website: https://echa.europa.eu/
Other Information
Boiling point, solubility in water, vapour pressure, relative density of the vapour/air mixture, and auto-ignition temperature are unknown in the literature.Check for peroxides prior to distillation; eliminate if found.
The information in this MSDS is only applicable to the specified product, unless otherwise specified, it is not applicable to the mixture of this product and other substances. This MSDS only provides information on the safety of the product for those who have received the appropriate professional training for the user of the product. Users of this MSDS must make independent judgments on the applicability of this SDS. The authors of this MSDS will not be held responsible for any harm caused by the use of this MSDS.