成人免费xx,国产又黄又湿又刺激不卡网站,成人性视频app菠萝网站,色天天天天

ChemicalBook >> journal list >> Science of the Total Environment >>article
Science of the Total Environment

Science of the Total Environment

IF: 8.19
Download PDF

Comparison of benzotriazole ultraviolet stabilizers (BUVs) removal from wastewater after subsequent stages of sequencing batch reactor (SBR) treatment process

Published:5 January 2024 DOI: 10.1016/j.scitotenv.2023.169813
Joanna Struk-Soko?owska , Alicja Faszczewska , Urszula Kotowska , Artur Mielcarek

Abstract

The research focused on benzotriazole ultraviolet stabilizers (BUVs) which are commonly used compounds despite being found dangerous, e.g. promoting breast cancer cell proliferation, damaging vital organs such as hearts, brains livers and kidneys. The aim of the study was to analyse the efficiency and removal rate of BUVs from wastewater depending on the quantity of tested compounds and SBR anaerobic-aerobic conditions. The study was conducted in sequencing batch reactors (SBRs - 17?L) with real flocculent activated sludge (8?L) and model wastewater (5?L) containing UV-326, UV-327, UV-328, UV-329 and UV-P from 50 to 600?μg?L?1. The SBR were operated in 390?cycles of 7?h and 10?min over 130?days. The similarity of the technological parameters of the treatment process to those used in a real wastewater treatment plant was maintained. Efficiency removal of individual BUVs was strictly dependent on the dose of compounds introduced into wastewater and ranged from 68.2 to 97?%. Removal of UV-329 occurred with lowest efficiency (from 68.2 to 85.2?%) while UV-326 was most efficiently removed from the wastewater (from 94.1 to 97?%). UV-329 was removed from wastewater with the lowest (0.0968–0.9524?μg?L?1?min?1) average removal rate while UV-327 with the highest (0.16–1.3357?μg?L?1?min?1), irrespective of BUVs dose in the influent. Secondary release of BUVs into the wastewater occurred in SBR during the settling phase and was dependent on the type and concentration of the BUVs in the raw wastewater. This occurrence was noted for UV-326?≥?100; UV-327?=?600; UV-328?≥?200; UV-329?≥?50 and UV-P?≥?100?μg?L?1. The settling phase needs to be shortened to the required minimum. This is an important conclusion for WWTPs in regards to SBR cycle duration and technological parameters of the treatment process.

Substances (6)

Related products
Procduct Name CAS Molecular Formula Supplier Price
1H-Benzotriazole 95-14-7 C6H5N3 1000 suppliers $6.00-$6515.49
Drometrizole 2440-22-4 C13H11N3O 502 suppliers $8.00-$450.40
UV-329 3147-75-9 C20H25N3O 474 suppliers $15.00-$1309.78
UV Absorber 326 3896-11-5 C17H18ClN3O 423 suppliers $6.00-$620.00
2-(2'-Hydroxy-3',5'-di-tert-butylphenyl)-5-chlorobenzotriazole 3864-99-1 C20H24ClN3O 365 suppliers $9.00-$1440.00
2-(2H-Benzotriazol-2-yl)-4,6-ditertpentylphenol 25973-55-1 C22H29N3O 352 suppliers $12.00-$350.00

Similar articles

IF:3.9

Removal of p-toluenesulfonic acid from wastewater using a filtration-enhanced electro-Fenton reactor?

RSC Advances Xueye Wang, Lehui Ren,etc Published: 7 September 2022
IF:3.8

Impact of the Water Removal Method on Tetraethyl Orthosilicate Direct Synthesis: Experiment and Process Assessment

Industrial & Engineering Chemistry Research Thuy T. H. Nguyen*, Norihisa Fukaya*,etc Published: 7 October 2019