POLY[(O-CRESYL GLYCIDYL ETHER)-CO-FORMALDEHYDE]
|
|
|
- CAS-Nr.
- 29690-82-2
- Englisch Name:
- POLY[(O-CRESYL GLYCIDYL ETHER)-CO-FORMALDEHYDE]
- Synonyma:
- Epichlorohydrin,o-cresol,formaldehydepolymer;CNE-202;Ortho-Cresol Novolac Epoxy Resins;POLY((O-CRESYL GLYCIDYL ETHER)-CO- &;o-Cresol,formaldehyde,epichlorohydrinpolymer;cresyl glycidyl ether/ formaldehyde copolymer;o-Cresol-epichlorhydrin-formaldehyde copolymer;POLY[(O-CRESYL GLYCIDYL ETHER)-CO-FORMALDEHYDE];2-(chloromethyl)oxirane,formaldehyde,2-methylphenol;o-Cresol,1-chloro-2,3-epoxypropane,formaldehydepolymer
- CBNumber:
- CB8121851
- Summenformel:
- C33H42O9X2
- Molgewicht:
- 582.68
- MOL-Datei:
- 29690-82-2.mol
|
POLY[(O-CRESYL GLYCIDYL ETHER)-CO-FORMALDEHYDE] Eigenschaften
Sicherheit
- Risiko- und Sicherheitserkl?rung
- Gefahreninformationscode (GHS)
| Kennzeichnung gef?hrlicher |
Xi |
|
|
| R-S?tze: |
36/37/38 |
|
|
| S-S?tze: |
26-36 |
|
|
| WGK Germany |
3 |
|
|
| Bildanzeige (GHS) |
|
| Alarmwort |
Warnung |
| Gefahrenhinweise |
| Code |
Gefahrenhinweise |
Gefahrenklasse |
Abteilung |
Alarmwort |
Symbol |
P-Code |
| H315 |
Verursacht Hautreizungen. |
Hautreizung |
Kategorie 2 |
Warnung |
![GHS hazard pictograms]() src="/GHS07.jpg" width="20" height="20" /> |
P264, P280, P302+P352, P321,P332+P313, P362 |
| H319 |
Verursacht schwere Augenreizung. |
Schwere Augenreizung |
Kategorie 2 |
Warnung |
![GHS hazard pictograms]() src="/GHS07.jpg" width="20" height="20" /> |
P264, P280, P305+P351+P338,P337+P313P |
| H335 |
Kann die Atemwege reizen. |
Spezifische Zielorgan-Toxizit?t (einmalige Exposition) |
Kategorie 3 (Atemwegsreizung) |
Warnung |
![GHS hazard pictograms]() src="/GHS07.jpg" width="20" height="20" /> |
|
|
| Sicherheit |
| P261 |
Einatmen von Staub vermeiden. |
| P264 |
Nach Gebrauch gründlich waschen. |
| P264 |
Nach Gebrauch gründlich waschen. |
| P271 |
Nur im Freien oder in gut belüfteten R?umen verwenden. |
| P280 |
Schutzhandschuhe/Schutzkleidung/Augenschutz tragen. |
| P302+P352 |
BEI BERüHRUNG MIT DER HAUT: Mit viel Wasser/... (Hersteller kann, falls zweckm??ig, ein Reinigungsmittel angeben oder, wenn Wasser eindeutig ungeeignet ist, ein alternatives Mittel empfehlen) waschen. |
| P305+P351+P338 |
BEI KONTAKT MIT DEN AUGEN: Einige Minuten lang behutsam mit Wasser spülen. Eventuell vorhandene Kontaktlinsen nach M?glichkeit entfernen. Weiter spülen. |
|
POLY[(O-CRESYL GLYCIDYL ETHER)-CO-FORMALDEHYDE] Chemische Eigenschaften,Einsatz,Produktion Methoden
R-S?tze Betriebsanweisung:
R36/37/38:Reizt die Augen, die Atmungsorgane und die Haut.
S-S?tze Betriebsanweisung:
S26:Bei Berührung mit den Augen sofort gründlich mit Wasser abspülen und Arzt konsultieren.
S36:DE: Bei der Arbeit geeignete Schutzkleidung tragen.
Chemische Eigenschaften
Hazardous polymerization can occur with aliphatic
amines in quantities greater than 1 lb.
Verwenden
The epoxy novolac resins are
used and cured in ways similar to the resins based on the
diglycidyl ether of bisphenol A. These resins differ from
bisphenol A epoxy resins in that whereas a bisphenol A
polymeric chain can contain a maximum of two epoxide
group regardless of chain length, cresolic and phenolic
novolacs can contain an epoxide group for each phenol or
cresol molecule incorporated in the chain.
Because of their high functionality, epoxy novolac resins,
when cured, produce tightly cross-linked systems with improved high-temperature performance, chemical resistance,
and adhesion over the resins based on the diglycidyl
ether of bisphenol A. The thermal stability of epoxy novolac
resins has made them useful for structural and electrical
laminates and as coatings and castings for elevated temperature
service. Owing to the chemical resistance of these resins,
they are used for lining storage tanks, pumps, and other
process equipment as well as for corrosion-resistant coatings.
Vorbereitung Methode
The term novolac refers to the reaction products of phenolic
compounds and formaldehyde. Glycidation of the phenolic
hydroxyl groups by epichlorohydrin under conditions similar
to those used for forming the diglycidyl ether of bisphenol A
produces the corresponding epoxy novolac resins. The average
n in the above formula varies from 0.2 to 1.8, depending
on the ultimate use of the resin.
POLY[(O-CRESYL GLYCIDYL ETHER)-CO-FORMALDEHYDE] Upstream-Materialien And Downstream Produkte
Upstream-Materialien
Downstream Produkte
POLY[(O-CRESYL GLYCIDYL ETHER)-CO-FORMALDEHYDE] Anbieter Lieferant Produzent Hersteller Vertrieb H?ndler.
Global( 23)Lieferanten
29690-82-2()Verwandte Suche:
- Ortho-Cresol Novolac Epoxy Resins
- Formaldehyde, polymer with 2-(chloromethyl)oxirane and 2-methylphenol
- POLY[(O-CRESYL GLYCIDYL ETHER)-CO-FORMALDEHYDE]
- Poly[(o-cresyl glycidyl ether)-co-formaldehyde] average Mn ~1,080
- Formaldehyde,polymerwith(chloromethyl)oxiraneand2-methylphenol
- o-Cresol,1-chloro-2,3-epoxypropane,formaldehydepolymer
- o-Cresol,formaldehyde,epichlorohydrinpolymer
- o-Cresol,polymerwith1-chloro-2,3-epoxypropaneandformaldehyde
- POLY((O-CRESYL GLYCIDYL ETHER)-CO-FORMAL DEHYDE), AVERAGE MN CA. 870
- POLY((O-CRESYL GLYCIDYL ETHER)-CO-FORMAL DEHYDE), AVERAGE MN CA. 1,080
- POLY((O-CRESYL GLYCIDYL ETHER)-CO-FORMAL DEHYDE), AVERAGE MN CA. 1,270
- POLY((O-CRESYL GLYCIDYL ETHER)-CO- &
- o-Cresol-epichlorhydrin-formaldehyde copolymer
- cresyl glycidyl ether/ formaldehyde copolymer
- 2-(chloromethyl)oxirane,formaldehyde,2-methylphenol
- Poly[(o-cresyl glycidyl ether)-co-formaldehyde] average Mn ~870
- Epichlorohydrin,o-cresol,formaldehydepolymer
- CNE-202
- 29690-82-2
- Formaldehyde Copolymers and Epoxies
- Polymer Science
- Engineering Polymers
- Polymers
