Tetrachlornaphthalin Chemische Eigenschaften,Einsatz,Produktion Methoden
ERSCHEINUNGSBILD
FARBLOSE BIS HELLGELBE KRISTALLE MIT CHARAKTERISTISCHEM GERUCH.
CHEMISCHE GEFAHREN
Zersetzung beim Verbrennen unter Bildung giftiger Gase (Chlorwasserstoff, Phosgen). Reagiert mit starken Oxidationsmitteln unter Feuer- und Explosionsgefahr.
ARBEITSPLATZGRENZWERTE
TLV: 2 mg/m?(als TWA); (ACGIH 2005).
MAK: IIb (nicht festgelegt, aber Informationen vorhanden) Hautresorption; (DFG 2005).
AUFNAHMEWEGE
Aufnahme in den K?rper durch Inhalation der Rauche und über die Haut.
INHALATIONSGEFAHREN
Beim Verdampfen bei 20°C tritt eine gesundheitssch?dliche Kontamination der Luft nicht oder nur sehr langsam ein, viel schneller jedoch beim Versprühen oder Dispergieren.
WIRKUNGEN BEI KURZZEITEXPOSITION
WIRKUNGEN BEI KURZZEITEXPOSITION: Die Substanz reizt schwach die Augen und die Haut.
WIRKUNGEN NACH WIEDERHOLTER ODER LANGZEITEXPOSITION
M?glich sind Auswirkungen auf die Leber. Führt zu Lebersch?den.
LECKAGE
Verschüttetes Material in abdichtbaren Beh?ltern sammeln; falls erforderlich durch Anfeuchten Staubentwicklung verhindern. Reste sorgf?ltig sammeln. NICHT in die Umwelt gelangen lassen. Pers?nliche Schutzausrüstung: Atemschutzger?t, P2-Filter für sch?dliche Partikel.
Chemische Eigenschaften
The chlorinated naphthalenes in which one or
more hydrogen atoms have been replaced by chlorine to
form wax-like substances, beginning with monochloronaphthalene and going on to the octachlor derivatives.
Their physical states vary from mobile liquids to waxysolids depending on the degree of chlorination; freezing/
melting points of the pure compounds range from 17C
for 1-chloronaphthalene to 198C for 1,2,3,4-
tetrachloronaphthalene.
1-Chloro-isomer: Hazard identification (based on
NFPA-704 M Rating System): Health 2, flammability 1,
reactivity 0.
2-Chloro-isomer:
Verwenden
Electrical insulating materials; in resins and
polymers for coating textiles, wood, and paper;
additive in cutting oils.
Allgemeine Beschreibung
Colorless to pale-yellow solid with an intense aromatic odor. Melting Point :182 C. Presents an environmental danger. Used in lubricants and in the manufacture of insulation for electrical wire. If released into the environment, bioaccumulation takes place in fish. Will persist in the environment causing long-term adverse effects. The halowaxes are technical-grade chlorinated naphthalenes containing tetrachloronaphthalene in its various isomers together with (mainly) trichloro- pentachloro- and hexa-chloronapthalenes in their various isomers.
Reaktivit?t anzeigen
tetrachloronaphthalene is non-flammable, but combustible. Gives off irritating or toxic gases in a fire. Incompatible with strong oxidizing agents. Reacts violently with aluminum, with bases, and with liquid O2.
Hazard
Combustible. Toxic by inhalation and skin
contact. Liver damage.
Health Hazard
Tetrachloronaphthalene may
cause liver injury.
Experiments on human volunteers showed
tetrachloronaphthalene to be nonacneigenic as
opposed to the penta- and hexachloro-derivatives
that produce very severe chloracne.
Sicherheitsprofil
Probably a poison. When heated to decomposition it emits highly toxic fumes of Cl-. See also CHLORINATED HYDROCARBONS, AROMATIC; and POLYCHLORINATED BIPHENYLS.
m?gliche Exposition
Industrial exposure from individual
chlorinated naphthalenes is rarely encountered; rather it
usually occurs from mixtures of two or more Chlorinated
naphthalenes. Due to their stability, thermoplasticity, and
nonflammability, these compounds enjoy wide industrial
application. These compounds are used in the production of
electric condensers; in the insulation of electric cables and
wires; as additives to extreme pressure lubricants; as supports for storage batteries; and as a coating in foundry use.
octachloro-: Used as a fireproof and waterproof additive
and lubricant additive. Pentachloro-: Used in electric wire
insulation and in additives to special lubricants. tetrachloro-: Used in electrical insulating materials and as an
additive in cutting oils. trichloro-: Used in lubricants and
in the manufacture of insulation for electrical wire.
Because of the possible potentiation of the toxicity of higher Chlorinated naphthalenes by ethanol and carbon tetrachloride, individuals who ingest enough alcohol to result in
liver dysfunction would be a special group at risk.
Individuals, e.g., analytical and synthetic chemists, mechanics and cleaners, who are routinely exposed to carbon tetrachloride or other hepatotoxic chemicals would also be at a
greater risk than a population without such exposure.
Individuals involved in the manufacture, utilization, or disposal of polychlorinated naphthalenes would be expected to
have higher levels of exposure than the general population.
Carcinogenicity
Tetrachloronaphthalene was not mutagenic
in the Salmonella Ames test.
Versand/Shipping
UN3082 Environmentally hazardous substances,
liquid, n.o.s., Hazard class: 9; Labels: 9-Miscellaneous hazardous material, Technical Name Required.
Inkompatibilit?ten
All are incompatible with oxidizers
(chlorates, nitrates, peroxides, permanganates, perchlorates,
chlorine, bromine, fluorine, etc.); contact may cause fires
or explosions. Keep away from alkaline materials, strong
bases, strong acids, oxoacids, epoxides. Keep away from
heat. Penta- is also incompatible with acids, alkalis.
Waste disposal
High-temperature incineration
with flue gas scrubbing. Incineration, preferably after mixing with another combustible fuel. Care must be exercised
to assure complete combustion to prevent the formation of
phosgene. An acid scrubber is necessary to remove the halo
acids produced.
Tetrachlornaphthalin Upstream-Materialien And Downstream Produkte
Upstream-Materialien
Downstream Produkte
