Bis(2-ethylhexyl)hydrogenphosphat Chemische Eigenschaften,Einsatz,Produktion Methoden
ERSCHEINUNGSBILD
FARBLOSE ODER BERNSTEINFARBENE FLüSSIGKEIT.
CHEMISCHE GEFAHREN
Zersetzung beim Erhitzen bei 240°C unter Bildung giftiger Rauchevon Phosphoroxiden. Greift viele Metalle unter Bildung brennbarer/explosionsf?higer Gase an (z.B. Wasserstoff, ICSC-Nr. 0001).
ARBEITSPLATZGRENZWERTE
TLV nicht festgelegt (ACGIH 2005).
MAK nicht festgelegt (DFG 2005).
AUFNAHMEWEGE
Aufnahme in den K?rper durch Inhalation des Aerosols und über die Haut.
INHALATIONSGEFAHREN
Verdampfung bei 20°C vernachl?ssigbar; eine gesundheitssch?dliche Partikelkonzentration in der Luft kann jedoch beim Versprühen schnell erreicht werden.
WIRKUNGEN BEI KURZZEITEXPOSITION
WIRKUNGEN BEI KURZZEITEXPOSITION: Die Substanz ver?tzt die Augen und die Haut.
LECKAGE
Ausgelaufene Flüssigkeit in abgedeckten trockenen Kunststoffbeh?ltern sammeln. Reste mit Sand oder inertem Absorptionsmittel aufnehmen und an einen sicheren Ort bringen. Pers?nliche Schutzausrüstung: Chemikalienschutzanzug mit umgebungsluftunabh?ngigem Atemschutzger?t.
R-S?tze Betriebsanweisung:
R21:Gesundheitssch?dlich bei Berührung mit der Haut.
R34:Verursacht Ver?tzungen.
S-S?tze Betriebsanweisung:
S26:Bei Berührung mit den Augen sofort gründlich mit Wasser abspülen und Arzt konsultieren.
S36/37/39:Bei der Arbeit geeignete Schutzkleidung,Schutzhandschuhe und Schutzbrille/Gesichtsschutz tragen.
S45:Bei Unfall oder Unwohlsein sofort Arzt zuziehen (wenn m?glich, dieses Etikett vorzeigen).
S25:Berührung mit den Augen vermeiden.
Chemische Eigenschaften
clear colorless to light yellow liquid
Verwenden
Extraction of metals.Bis(2-ethylhexyl) phosphate is used as a lubricant additive, corrosion inhibitor and a metal extractant. It is involved in the solvent extraction of uranium salts and rare earth metals. Iron(II) ions are extracted after reduction of Iron(III) ions. Further, it is used as a plasticizer and as a solvent in the synthesis of plastic.
Vorbereitung Methode
Produced by chlorinating bis(2-ethylhexyl) phosphonate
to give the phosphate diester chloride, followed by hydrolysis,
or by saponification of tris(2-ethylhexyl) phosphate
.
Synthese
2-ethylhexan-1-ol could be used as a starting material to synthesize Bis(2-ethylhexyl) phosphate.
Allgemeine Beschreibung
Odorless light yellow liquid. Floats on water.
Reaktivit?t anzeigen
Organophosphates, such as Bis(2-ethylhexyl) phosphate, are susceptible to formation of highly toxic and flammable phosphine gas in the presence of strong reducing agents such as hydrides. Partial oxidation by oxidizing agents may result in the release of toxic phosphorus oxides. Mildly corrosive to most metals; may form flammable hydrogen gas [USCG, 1999].
Health Hazard
Contact with liquid irritates eyes and may cause serious injury; consult an eye specialist. Also causes skin irritation on contact. Ingestion produces irritation similar to that caused by strong vinegar.
Brandgefahr
Special Hazards of Combustion Products: Irritating phosphorus oxides may be released.
l?uterung methode
Contaminants of commercial samples include the monoester, polyphosphates, pyrophosphate, 2-ethylhexanol and metal impurities. Dissolve the acid in n-hexane to give an 0.8M solution. Wash this with an equal volume of M HNO3, then with saturated (NH4)2CO3 solution, with 3M HNO3, and twice with water [Petrow & Allen Anal Chem 33 1303 1961]. Similarly, the impure sodium salt, after scrubbing with pet ether, is acidified with HCl and the free organic acid is extracted into pet ether and purified as above [Peppard et al. J Inorg Nucl Chem 7 231 1958], or as described by Stewart & Crandall [J Am Chem Soc 73 1377 1951]. It can be purified via its copper salt [McDowell et al. J Inorg Nucl Chem 38 2127 1976]. [Beilstein 1 IV 1796.]
Bis(2-ethylhexyl)hydrogenphosphat Upstream-Materialien And Downstream Produkte
Upstream-Materialien
Downstream Produkte