| Identification | Back Directory | [Name]
POLY(VINYL METHYL ETHER) | [CAS]
9003-09-2 | [Synonyms]
Gantrez m
Gantre m-154
Gantrez m 093
Gantrez m 094
Gantrez m 154
Gantrez m 574
Gantrez m-094
poly(vinyl ether)
POLY(METHYL VINYL ETHER)
POLY(VINYL METHYL ETHER)
methoxy-ethenhomopolymer
VINYL METHYL ETHER POLYMER
METHYL VINYL ETHER POLYMER
Ethene,methoxy-,homopolymer
Ether, methyl vinyl, polymers
vinyl methyl ether homopolymer
Poly(methyl vinyl ether) solution
poly(vinylmethylether)(70%intoluene)
poly(vinyl methyl ether) macromolecule
Poly(methyl Vinyl Ether) (30% in Water)
Poly(vinyl Methyl Ether) (30% in Water)
POLY(VINYL METHYL ETHER): (50% IN WATER)
Poly(vinyl methyl ether) (50% in toluene)
Poly(vinyl Methyl Ether) (50% in Methanol)
Poly(Methyl vinyl ether) solution 50 wt. % in H2O
Polyvinylmethylether, mittlere Molmasse 52000 g/mol
POLY(METHYL VINYL ETHER), 50 WT. % SOLUT ION IN WATER
Methyl Vinyl Ether Polymer
Poly(methyl Vinyl Ether)
Vinyl Methyl Ether Polymer
Methyl Vinyl Ether Polymer
Poly(vinyl Methyl Ether)
Vinyl Methyl Ether Polymer | [EINECS(EC#)]
230-993-8 | [Molecular Formula]
C9H18O3X2 | [MDL Number]
MFCD00161528 | [MOL File]
9003-09-2.mol | [Molecular Weight]
174.24 |
| Hazard Information | Back Directory | [Definition]
ChEBI: A macromolecule composed of repeating methoxyethyl groups. | [Uses]
Poly(methyl vinyl ether) solution can be used asa precursor to synthesize thermosensitive microgels. | [Preparation]
Vinyl ethers are prepared by reaction of acetylene and alcohols in the
presence of the potassium alkoxide as catalyst:
For the production of polymers, methyl, ethyl and isobutyl vinyl ethers are
the most common monomers.
Vinyl ethers are susceptible only to cationic polymerization. In a typical process, methyl vinyl ether is agitated with boron
trifluoride (BF 3. 2H20). The temperature is kept at about l0?? by cooling
for 3-4 hours; the reactor is then sealed and the temperature allowed to rise
to 100??C. Reaction is complete in about 10 hours and the polymer is obtained
as a viscous mass. It is interesting to note that poly(vinyl isobuty ether) may
be obtained in crystalline form by conducting polymerization at - 80?? to
-60??C in liquid propane using boron trifluoride etherate as initiator. This
was the first stereoregular polymerization to be achieved. Incidentally,
isotactic polymer has also been prepared by the use of Ziegler-Natta type
catalysts and this was the first indication that these catalysts could polymerize a suitable monomer by a cationic mechanism.
Poly(vinyl methyl ether) is water-soluble and is used in adhesive and textile sizes. The ethyl and isobutyl polymers find use in pressure-sensitive adhesives. | [Solubility in organics]
Alcohols, aromatic hydrocarbons, chlorinated hydrocarbons, esters, glycols, glycol esters, water |
|
|