| Identification | More | [Name]
PERFLUORO-1,3-DIMETHYLCYCLOHEXANE | [CAS]
335-27-3 | [Synonyms]
DECAFLUORO-1,3-BIS(TRIFLUOROMETHYL)CYCLOHEXANE
FLUTEC PP3
FLUTEC PP3102
FLUTECR PP3
HEXADECAFLUORO-1,3-DIMETHYLCYCLOHEXANE
PERFLUORO-1,3-DIMETHYLCYCLOHEXANE
1,1,2,2,3,3,4,5,5,6-decafluoro-4,6-bis(trifluoromethyl)-cyclohexan
1,1,2,2,3,3,4,5,5,6-Decafluoro-4,6-bis(trifluoromethyl)cyclohexane
1,1,2,2,3,3,4,5,5,6-decafluoro-4,6-bis(trifluoromethyl)-Cyclohexane
1,3-bis(trifluoromethyl)perfluorocyclohexane
Cyclohexane, 1,1,2,2,3,3,4,5,5,6-decafluoro-4,6-bis(trifluoromethyl)-
Cyclohexane, decafluoro-1,3-bis(trifluoromethyl)-
Cyclohexane, perfluoro-1,3-dimethyl-
cyclohexane,1,1,2,2,3,3,4,5,5,6-decafluoro-4,6-bis(trifluoromethyl)-
cyclohexane,decafluoro-1,3-bis(trifluoromethyl)-
Decafluoro-4,6-bis(trifluoromethyl)cyclohexane
Perfluor-1,3-dimethylcyclohexan
PERFLUORO-1,3-DIMETHYLCYCLOHEXANE, TECH. , 80%
PERFLUORO-1,3-DIMETHYLCYCLOHEXANE, TECH. 80+%
PERFLUORO-1,3-DIMETHYLCYCLOHEXANE,TECHNICAL | [EINECS(EC#)]
206-386-9 | [Molecular Formula]
C8F16 | [MDL Number]
MFCD00001469 | [Molecular Weight]
400.06 | [MOL File]
335-27-3.mol |
| Safety Data | Back Directory | [Hazard Codes ]
Xi | [Risk Statements ]
R36/37/38:Irritating to eyes, respiratory system and skin . | [Safety Statements ]
S26:In case of contact with eyes, rinse immediately with plenty of water and seek medical advice .
S36:Wear suitable protective clothing . | [WGK Germany ]
3
| [RTECS ]
GV4990000 | [Hazard Note ]
Irritant | [TSCA ]
T | [HS Code ]
29038900 |
| Hazard Information | Back Directory | [Chemical Properties]
clear colorless liquid | [Uses]
Perfluoro-1,3-dimethylcyclohexane has been used in:
- the preparation of amorphous fluorocarbon films by plasma polymerization
- hydroformylation of linear terminal alkenes using rhodium based catalysts under fluorous biphasic conditions in the presence and absence of toluene
| [General Description]
Quenching of the second excited singlet state of xanthione in inert, nonpolar perfluoro-1,3-dimethylcyclohexane has been studied using picosecond time-resolved fluorescence decay methods. | [Purification Methods]
Fractionally distil it, then 35mL are sealed with about 7g KOH pellets in a borosilicate glass ampoule and heated at 135o for 48hours. The ampoule is cooled, opened, and the liquid is resealed with fresh KOH in another ampoule and heated as before. This process is repeated until no further decomposition is observed. The substance is then washed with distilled water, dried (CaSO4) and distilled. [Grafstein Anal Chem 26 523 1954, Beilstein 5 III 378.] IRRITANT. |
|
|