Identification | More | [Name]
1-Bromohexadecane | [CAS]
112-82-3 | [Synonyms]
1-BROMOHEXADECANE 1-HEXADECYL BROMIDE CETYL BROMIDE HEXADECYL BROMIDE N-HEXADECYL BROMIDE 1-Bromhexadecan 1-bromo-hexadecan Hexadecane,1-bromo- Hexadecylbromid n-Hexadecyl-1-bromide Palmitylbromide BROMOHEXADECANE N-HEXADECYL BROMIDE (CETYL) 1-BROMOHEXADECANE pure Cetyl bromide, Hexadecyl bromide | [EINECS(EC#)]
204-008-7 | [Molecular Formula]
C16H33Br | [MDL Number]
MFCD00000230 | [Molecular Weight]
305.34 | [MOL File]
112-82-3.mol |
Chemical Properties | Back Directory | [Appearance]
colourless to yellow liquid or solid | [Melting point ]
16-18 °C(lit.)
| [Boiling point ]
190 °C11 mm Hg(lit.)
| [density ]
0.999 g/mL at 25 °C(lit.)
| [vapor density ]
10.6 (vs air)
| [vapor pressure ]
<1 mm Hg ( 20 °C)
| [refractive index ]
n20/D 1.4609(lit.)
| [Fp ]
>230 °F
| [storage temp. ]
Inert atmosphere,Room Temperature | [solubility ]
Difficult to mix. | [form ]
Liquid After Melting | [color ]
Clear amber to brown-black | [Specific Gravity]
1.000 (20/4℃) | [Stability:]
Stable. Incompatible with strong oxidizing agents. Combustible. | [Water Solubility ]
INSOLUBLE | [Detection Methods]
GC | [BRN ]
773989 | [Dielectric constant]
3.71 | [InChIKey]
HNTGIJLWHDPAFN-UHFFFAOYSA-N | [LogP]
8.54 | [CAS DataBase Reference]
112-82-3(CAS DataBase Reference) | [NIST Chemistry Reference]
Hexadecane, 1-bromo-(112-82-3) | [EPA Substance Registry System]
112-82-3(EPA Substance) |
Safety Data | Back Directory | [Hazard Codes ]
Xi | [Risk Statements ]
R36/37/38:Irritating to eyes, respiratory system and skin . | [Safety Statements ]
S26:In case of contact with eyes, rinse immediately with plenty of water and seek medical advice . S36:Wear suitable protective clothing . | [WGK Germany ]
3
| [TSCA ]
Yes | [HS Code ]
29033036 |
Hazard Information | Back Directory | [Chemical Properties]
colourless to yellow liquid or solid | [Uses]
1-Bromohexadecane has been used: in the preparation of soluble carbon nano-onions by covalent functionalization with hexadecyl chains as extraction solvent in determination of endocrine-disrupting phenols (EDPs) in water samples by ultrasound-assisted emulsification microextraction (MS-USAEME) method in the preparation of [2-(methacryloyloxy)ethyl]dimethylhexadecylammonium bromide monomer, required for the synthesis of novel methacrylate based adsorbents in the synthesis of surfactant, N-hexadecyl ethylenediamine triacetic acid (HED3A) | [Uses]
1-Bromohexadecane is used in the preparation of soluble carbon nano-onions by covalent functionalization with hexadecyl chains. It is also used to synthesize [2-(methacryloyloxy)ethyl]dimethylhexadecylammonium bromide monomer, required for the synthesis of novel methacrylate based adsorbents. | [Preparation]
Synthesis of 1-Bromohexadecane from hexadecanol by bromination: put hexadecanol into the reaction pot and stir, heat, melt and put in red phosphorus. Add bromine drop by drop at 100℃ with sufficient stirring on one side, control 120-130℃, about 6h drop by drop, continue the reaction and drain the hydrogen bromide. Cool to below 50 ℃, add saturated and sodium chloride, stirring and washing, resting stratification, parting off the lower waste stream, then wash with water to neutral, distillation, collect 220-230 ℃ (2kPa) fraction, to obtain 1-bromohexadecane. | [Purification Methods]
Shake the bromide with H2SO4, wash with H2O, dry with K2CO3 and fractionally distil it in vacuo.[Beilstein 1 IV 542.] |
|
|