<li id="jd3ex"><dl id="jd3ex"><div id="jd3ex"></div></dl></li><rt id="jd3ex"></rt>

ChemicalBook CAS DataBase List 2,4,5-Trifluorophenylacetic acid

2,4,5-Trifluorophenylacetic acid synthesis

7synthesis methods

Product Name:2,4,5-Trifluorophenylacetic acid
CAS Number:209995-38-0
Molecular formula:C8H5F3O2
Molecular Weight:190.12

synthesis of 2,4,5-trifluorophenylacetic acid: A 100 mL flask was charged 10.0 g of 2,4,5-trifluoromandelic acid, 23.9 g of H3PO3 (6 eq.), 0.73 g of Nal (0.1 eq.) and 0.47 g (0.10 eq.) of MSA. The obtained mixture was stirred at 95-105°C for 24 hrs. Once the conversion is completed (by HPLC; conversion > 99%, typically achieved after 24 hours), the mixture is cooled to room temperature, and 20 mL of methyl tert-butyl ether were added and then 20 mL of water where added. The obtained mixture was stirred for 5 min, then the organic layers were separated. Then 10 mL of methyl tert-butyl ether was added to the aqueous layers, stirred for 5 min, then the phase were separated. The organic layers were combined. The combined organic layers were concentrated under vacuum at 35°C, to provide crude 2,4,5-trifluorophenylacetic acid(TFPAA). To the obtained crude TFPAA was recrystallized from toluene, to obtain TFPAA, as a white crystals, 6.4 g, molar yield 69.5%, chemical purity of HPLC 99.47% A/A%
synthesis of 2,4,5-trifluorophenylacetic acid

773837-37-9 Synthesis

773837-37-9
0 suppliers
inquiry

75-09-2 Synthesis

75-09-2
1210 suppliers
$10.00/25ML

367-23-7 Synthesis

367-23-7
371 suppliers
$8.00/5g

209995-38-0
486 suppliers
$10.00/10g

Yield:209995-38-0 99.2%

Reaction Conditions:

Stage #1: sodium cyanidewith sodium stearate;nitrobenzene;sodium hydroxide in water at 115; under 3420.23 Torr; for 0.75 h;Inert atmosphere;
Stage #2: dichloromethane;1,2,4-trifluorobenzene at 6 - 142; under 2280.15 - 5320.36 Torr; for 6 h;Further stages;Solvent;Pressure;Reagent/catalyst;

Steps:

1 Example 1A method for synthesizing 2,4,5-trifluorophenylacetic acid, comprising the following steps:

1) Sodium cyanide,Sodium hydroxide,Mix sodium stearate and deionized water,Obtaining the mixture M1, sodium cyanide,Sodium hydroxide,The molar ratio of sodium stearate to deionized water was 1:0.16:0.07:13.2) Under argon protection,Mix the catalyst with nitrobenzene,Control the reaction temperature to 115 ° C,The reaction pressure is 4.5 atmospheres.After stirring for 45 minutes,First add dichloromethane,When the amount of dichloromethane added is 5% of its own,Start adding 1,2,4-trifluorobenzene,The volume ratio of 1,2,4-trifluorobenzene and dichloromethane drops was kept equal.After the drop is over,Control the reaction temperature to 142 ° C,The reaction pressure is 7 atmospheres.The reaction was carried out for 1.5 h to obtain a mixture M2.Control the reaction temperature to 6 ° C,The reaction pressure is 3 to 4 atmospheres.Add the mixture M1, drop,Control the reaction temperature to 76 ° C,The reaction pressure is 6 atmospheres.Continue to react at 4.5h,After cooling and dropping to normal temperature, a mixture M3 was obtained.In this step,The molar ratio of 1,2,4-trifluorobenzene to dichloromethane is 1:1.02,The ratio of 1,2,4-trifluorobenzene to nitrobenzene is 1 g: 4.5 mL.The molar ratio of 1,2,4-trifluorobenzene to sodium cyanide is 1:1.06,The mass ratio of 1,2,4-trifluorobenzene to the catalyst was 1:0.18.The preparation method of the catalyst used in this step is as follows:HY-98 zeolite,Zinc chloride is added to a 5% by mass aqueous solution of hydrochloric acid,Soak for 3h, then concentrate and evaporate with a rotary evaporator.The obtained solid is baked and activated at 200 ° C for 7 h to obtain zinc chloride.The mass ratio of zeolite to aqueous hydrochloric acid was 1:4:13.3) The mixture M3 is filtered to remove insoluble matter, layered, and the organic phase is washed with water.After drying anhydrous sodium sulfate,The solvent was evaporated to give a liquid L.4) Liquid L,Tetrabutylammonium chloride is mixed with hydrochloric acid with a mass fraction of 20%.Control the reaction temperature to 108 ° C,The reaction pressure is 4 atmospheres.The reaction ended in 80 minutes.After cooling the system, pour it into crushed ice.A white solid 2,4,5-trifluorophenylacetic acid was precipitated.In this step,The mass ratio of liquid L to tetrabutylammonium chloride is 1:0.1;The mass ratio of liquid L to hydrochloric acid was 1:6.5.The molar yield was 99.2% and the GC purity was 98.7%.

References:

CN110128258,2019,A Location in patent:Paragraph 0033-0086

327-52-6 Synthesis