本公司現是美國ACS MATERIAL中國區獨家代理商，代理其可分散石墨烯產品。單層剝離石墨烯比率>80% single ratio>80%
請認準是單層石墨烯粉末，國外好多產品都稱為graphene石墨烯，其實是多層石墨烯或者是石墨烯納米微片，或者是石墨烯鱗片，請認準
Product Description:
Dispersible graphene is prepared through the complete reduction of graphene oxide, which is prepared by the modified Hummer’s method. It should be noted that the graphene prepared by the usual method is easy to form the graphene aggregation. It is very hard, even its volume is much smaller than its parent material graphite. The resulting graphene agglomerate is not soluble or redispersable in water or other polar solvents, making further processing difficult. Our product Dispersible graphene overcome the challenge, and it can be redispersed in many solvents, such as in water, alcohol, acetone, DMF etc. Fig.1 shows the difference between dispersible graphene and non-redispersible graphene.
Fig. 1. The difference between dispersible graphene and non-redispersible graphene. a) 100 mesh flake graphite; b) Graphene prepared by the normal method, It is very hard, and it can not be redispersed in the solvents; c) Dispersible graphene, loose, like ash
Fig. 2. The TEM photo of dispersible graphene
Fig. 3. The FT-IR spectra of graphene oxide (a) and dispersible graphene (b)
Fig. 4. The TG curve of graphene oxide (a) and dispersible graphene (b)
It should be noted that the product we supply is the single-layer (>80%) dispersible graphene, not graphene nanoplate. The thickness of graphene nanoplate is alway larger than 20 nm, therefore it always consists of more than 50 layer graphene, and it lose the intrinsic special properties of single-layer graphene.
1）由于石墨烯具有非常高的比表面積，導致其團聚非常嚴重，難以在
極性或非極性溶劑中分散。
我們目前完全解決好石墨烯的分散問題，為 其在復合材料中的應用掃清了障礙；
2）氧化石墨烯是對石墨烯改性的中間體，我們已得到羧基化的石墨烯，表面羧基含量在5.0 wt.%左右，大大利于其下一步的應用；
3）可批量供應氧化石墨烯膜（紙）和石墨膜（紙）；
4）可訂制氧化石墨烯或石墨烯分散液（極性或非極性溶劑中均可）；
5）與美國名校合作，推出高端的改性石墨烯-氨基化的石墨烯和巰基化石墨烯。