浮花劑 TP30 TP30是一種非常方便好用的外加型紋理劑可產生美術花紋、錘紋、桔紋、大小皺紋型粉末涂料，做好底粉后外混浮花劑即可。以前浮花劑有次上粉好，二次上粉不好也就是回收粉效果不好的缺點，此浮花劑是我們潛心研究改進了的品種。 1．其帶電性調到與粉末粒子相近的程度，上粉與粉末一致。 2．產品已經經過合理粗細搭配（粗的增強立感、細的有效消除縮孔），它做出的紋理粉立感更強更好，消除見底縮孔的作用更強。 3．做大紋則少加，做小紋則多加。適當加點2-甲基咪唑?qū)αⅢw感有好處。 Floating Agent TP30 TP30 can produce pattern types of art, hammer, orange peel, small and large wrinkles and so on. It can be applied in Epoxy and Polyester powder coatings. Technical data: Appearance: White or yellow powder Melting point: 110~120 Celsius degree Volatile: ≤ 0.3% Specification and Application 1. The product has been composed of coarse and fine powders, the coarse powder is used for the cubic effect, while the fine powder is used for eliminating shrinkage. 2. Add less amount, make larger texture pattern and add more amount if you want to make small texture pattern. Appropriate amount of 2-methylimidazole will get better cubic effect. 3. The curing temperature has little influence on texture size. ? Dosage: 0.2~0.8% based on total amount of coating formula, directly mixed in post production. TP30 can be used for all kinds of thermosetting powder coating. Packaging: Polyethylene lined, multi-ply paper bag, 25kg/bag. Storage conditions: Keep in cool place; keep away from fire.