成人免费xx,国产又黄又湿又刺激不卡网站,成人性视频app菠萝网站,色天天天天

Welcome to chemicalbook!
+1 (818) 612-2111
Inquriy
Try our best to find the right business for you.
Do not miss inquiry messages Please log in to view all inquiry messages.

Welcome back!

RFQ
skype
MY Account
Top
Postion:Product Catalog >Catalyst and Auxiliary>polymer>V8 Curing Agent
V8 Curing Agent
  • V8 Curing Agent
  • V8 Curing Agent
  • V8 Curing Agent
  • V8 Curing Agent
  • V8 Curing Agent

V8 Curing Agent NEW

Price Get Latest Price
Package 20kg 25kg 30kg
Min. Order: 500kg
Supply Ability: 500tons
Update Time: 2024-07-08

Product Details

Product Name: V8 Curing Agent Min. Order: 500kg
Purity: 99% Supply Ability: 500tons
Release date: 2024/07/08

PHYSICAL PROPERTY:

Appearance: colorless to yellowish liquid

Density (20 ℃) : 1.070 g/cm3

Flash point:68 ℃

Refractive index (20 ℃) : 1.49

SADT: > 60 ℃

The active oxygen content: 8.9%

STORY:

Because organic peroxides are unstable during storage, they lose mass over time.There is a recommended storage temperature for each peroxide.According to the recommended storage conditions, the product specifications shall be maintained for at least 3 months after delivery.

The recommended storage temperature is <30

 

Safety in use:

Operate and use the product in a dry and well-ventilated environment, away from fire and heat, and away from direct sunlight.At the same time, avoid contact with reducers, acids, alkalis, dryers, promoters, etc.

 

Application:

V8 can be used as quartz curing agent.Typical dosage is 0.8-1.0% of resin dosage.

The common curing temperature is 80-100℃.

 

Curing characteristic:

Factors should be considered when selecting curing agent system:

1. The process

2. Resin type

3. Gel time and preservation period required

4. Product thickness

5. Room temperature

6. Nature of the additive

 

Curing performance comparison:

Curing condition: 80, the dosage of curing agent accounts for 1% of resin.

 

For OT, it is not easy to continue to increase the temperature to reduce styrene residue,the reason is that the exotherm temperature will be further increased and the curing speed will be accelerated, which will easily cause plate cracking.For V8, low exothermic peak can further increase the curing temperature to 85-90 degrees to reduce styrene residue.

Company Profile Introduction

Sinomore(International) New Material Co.,Ltd. is a national high-tech enterprise that integrates research and development, production, and sales, specializing in polymer material initiators. The company primarily produces high-efficiency artificial quartz stone curing agents, polyether polyol (POP) initiators, polypropylene (PP) mask melt-blown material modifiers, expanded polystyrene (EPS), solar EVA film vulcanizing agents, rubber vulcanizing agents, PVA resin synthetic curing agents, fiberglass curing agents, two-component road marking paint curing agents, insulating layer curing agents, polyvinyl chloride (PVC), low-density polyethylene (LDPE), as well as related high-efficiency specialty chemical additives and technical services.

You may like

Recommended supplier

Product name Price   Suppliers Update time
$0.00/1T
VIP1Y
Yujiang Chemical (Shandong) Co.,Ltd.
2024-04-17
$700.00/100μg
VIP3Y
TargetMol Chemicals Inc.
2024-10-23
$117.00/1mg
VIP5Y
TargetMol Chemicals Inc.
2024-11-14