Tolterodine tartrate NEW
| Price | Get Latest Price |
| Package | 25KG |
| Min. Order: | 1KG |
| Supply Ability: | 50000KG/month |
| Update Time: | 2023-08-29 |
Product Details
| Product Name: Tolterodine tartrate | CAS No.: 124937-52-6 |
| EC-No.: 620-503-4 | Min. Order: 1KG |
| Purity: 99% | Supply Ability: 50000KG/month |
| Release date: 2023/08/29 |
| CAS: | 124937-52-6 |
| MF: | C26H37NO7 |
| MW: | 475.57 |
| EINECS: | 620-503-4 |
| Product Categories: | Detrol LA, Kabi-2234, PNU-200583E;APIs;Active Pharmaceutical Ingredients;Medicine intermediate;In treatment of urinary incontinence;Inhibitors;Intermediates & Fine Chemicals;Pharmaceuticals;Tolterodine;Aromatics;Pfizer compounds;API |
| Mol File: | 124937-52-6.mol |
 | |
| Tolterodine tartrate Chemical Properties |
| Melting point | 205-210°C |
| alpha | 54625 +36.0° |
| storage temp. | Sealed in dry,2-8°C |
| solubility | Methanol (Sparingly), Water (Slightly) |
| pka | 9.87(at 25℃) |
| form | Solid |
| color | White to Off-White |
| BCS Class | 1 |
| CAS DataBase Reference | 124937-52-6(CAS DataBase Reference) |
| Tolterodine tartrate Usage And Synthesis |
| Chemical Properties | White-to-Off-White Crystalline Powder |
| Originator | Detrol,Pharmacia and Upjohn |
| Uses | Tolterodine tartrate (Detrol LA) is a tartrate salt of tolterodine that is a competitive muscarinic receptor antagonist. Tolterodine tartrate (Detrol LA) is indicated for the treatment of overactive bladder with symptoms of urge urinary incontinence, urge |
| Uses | Tolterodine (tartrate) is a competitive antagonist of muscarinic (M) receptors (Ki = 1.4, 2.7, 3.6, 3.1, and 2.2 nM for M1 through M5, respectively). Antagonists of muscarinic receptors, including tolterodine, are effective in treating overactive bladder symptoms.[Cayman Chemical] |
| Uses | A muscarinic receptor antagonist. Used in the treatment of urinary incontinence. |
| Manufacturing Process | Trans-cinnamic acid (100 g, 675 mmol) is added to a 1 L 4-neck round bottom flask equipped with a mechanical stirrer, thermocouple, and nitrogen inlet. Para-cresol (76.6 g, 708 mmol) is preheated in a water bath at 60°C and added to the cinnamic acid followed by concentrated sulfuric acid (13.0 ml, 243 mmol). The reaction is immediately heated to a set point of 122.5°C and stirred at 120°-125°C until judged to be complete by HPLC analysis. When the reaction is complete the mixture is cooled to 100°C and added to a prewarmed separatory funnel (500 ml). The bottom layer containing the sulfuric acid is removed and toluene (280 ml), water (50 ml) and potassium carbonate (47%, 10 ml) are added to the separatory funnel containing the crude product. The pH of the aqueous layer is adjusted to between 5-8 with additional 47% potassium carbonate. The layers are separated and the organic layer is then washed once with water (50 ml). The organic layer is concentrated to a final volume of approximately 150 ml under reduced pressure. Isopropanol (350 ml) is then added, and distillation is continued to a volume of 350 ml. Isopropanol (150 ml) is again added and again distilled to 350 ml (2 times). The mixture is then cooled to 30°-40°C with rapid stirring until the product crystallizes. The rapid stirring is continued after crystallization. The product is cooled to 0°-5°C and held at this temperature for 1 h, filtered and washed with isopropanol (200 ml) cooled to 0°-5°C. If the last portion of the wash is colored the wash is continued until no more color is removed. The solids are then dried at 60°C under reduced pressure to give the 3,4-dihydro-6-methyl-4-phenyl-2H-benzopyran-2-one, melting point (uncorrected) 83°-85°C. 3,4-Dihydro-6-methyl-4-phenyl-2H-benzopyran-2-one (100.0 g, 420.2 mmol) is added to toluene (500 ml). The mixture is degassed by purging alternately with vacuum and nitrogen and then cooled to -21°C. Diisobutylaluminum hydride in toluene solution (DIBAL, 1.5 M, 290 ml, 435 mmol) is then slowly added over 2 h via add funnel while maintaining the reaction temperature at - 20°-25°C. The reaction is usually done when the DIBAL add is completed. If the reaction is not done additional DIBAL can be added in increments. When the reaction is done (<1% lactone) ethyl acetate (45 ml) is added at -20°- 25°C via add funnel. Very little exotherm is observed. Next, citric acid (23%, 500 ml) is added. The mixture is stirred at 45°-50°C for 1 h (or stirred overnight at 20°-25°C), the phases are separated, the organic phase is washed with water (2 times 300 ml). The organic phase is concentrated to 250 ml under reduced pressure. Methanol (500 ml) is added, and the mixture is concentrated to 250 ml. The methanol addition and distillation is repeated to give the 3,4-dihydro-6-methyl-4-phenyl-2H-benzopyran-2-ol in methanol solution. 3,4-Dihydro-6-methyl-4-phenyl-2H-benzopyran-2-ol in methanol (500 ml) is slowly added to palladium on carbon (5%, 22 g, 1.5 mmol) while maintaining a slight nitrogen purge. If 3,4-dihydro-6-methyl-4-phenyl-2H-benzopyran-2-ol is added too quickly without a nitrogen purge the catalyst will ignite the methanol. Diisopropylamine (147.0 ml, 1.05 mol) is added, and the mixture is hydrogenated at 45-50 psi and 48°C until the reaction is judged to be complete by HPLC (<2% lactol). The reaction is usually done after 10 h, but can be run overnight. The reaction mixture is cooled and removed from the hydrogenator using a methanol (150 ml) rinse. The combined reaction mixture and rinse is filtered through a bed of solka floc (10 g). The solka floc is washed thoroughly with methanol (100 ml) and the filtrate is concentrated to remove methanol while ethyl acetate is being added back. The volume of this solution of the (2-diisopropylamino)ethyl)benzyl)-p-cresol is adjusted to 700 ml using ethyl acetate and the mixture is heated to 55°C. To form the hydrochloride salt of the (2-diisopropylamino)ethyl)benzyl)-p_x0002_cresol (Tolterodine), concentrated hydrochloric acid (52.5 ml, 630 mmol) is added over 15 min. The resulting slurry is gradually cooled to -15°-20°C and held at this temperature for 1 h. Tolterodine hydrochloride is collected by filtration, washed 3 times with ethyl acetate, and dried overnight under reduced pressure at 600 to give the tolterodine hydrochloride, melting point 199°-201°C. Tolterodine hydrochloride (130.0 g, 359 mmol), methylene chloride (1.3 L) and water (650 ml) are mixed. The mixture is stirred rapidly while adding sodium hydroxide (50%, 13.0 ml) and sodium carbonate (13.0 g, 123 mmol). The pH as determined by pH paper is 10-11. After stirring thoroughly for approximately 15 min two clear homogeneous phases form. Stirring is continued for another 45 min, the layers are separated and the organic phase is washed with water (2 times 650 ml). The methylene chloride mixture is concentrated under reduced pressure. The concentrate is dissolved in ethanol (325 ml) and warmed to 60°-70°C. L-tartaric acid (80.84 g, 539 mmol) slurried in hot ethanol (810 ml) is added via add funnel at 60°-70°C over approximately 30 min. When the addition is done the slurry is refluxed for 1 h, gradually cooled to 0°C and held at this temperature for 1 h. The slurry is filtered, washed with ethanol (2 times 260 ml) previously cooled to 0°C, and dried overnight under reduced pressure at 60°C to give the crude title compound. The crude product (136.0 g) and ethanol (5.44 L) are mixed and heated to 80°C for 30 min. The mixture is concentrated to half the initial volume by distilling 2.72 L of ethanol. The mixture is gradually cooled to 20°- 25°C over 1 h, placed in an ice bath, and held at 0°C for 1 h. The tolterodine L-tartrate is collected by filtration, washed with ethanol (2 times 272 ml ) previously cooled to 0°C, and dried overnight under reduced pressure at 60°C to give product. This procedure was repeated a second time on 81.0 g of once recrystallized tolterodine L-tartrate to give the optically active (+)-(R)-2-(α- (2-(diisopropylamino)ethyl)benzyl)-p-cresol L-tartrate, melting point (uncorrected)=210°-211°C. |
| Therapeutic Function | Anticholinergic |
Product picture
Packing &shipping&Payment
Packing:25kg/drum
Shipping:by sea or by air
Payment:T/T,western union,moneygram
Packaging Details drum
Port:Tianjin
Lead Time :
Shipping:by sea or by air
Payment:T/T,western union,moneygram
Packaging Details drum
Port:Tianjin
Lead Time :
| Quantity(Kilograms) | 1 - 10000 | >10000 |
| Est. Time(days) | 5 | To be negotiated |
Company information
Hebei Mojin Biotechnology Co., Ltd, Our company is a professional in 4'-Methylacetophenone,Levamisole hydrochloride ,N-Methylformamide and other chemical reagents research and development production enterprises. Our business covers more than 30 countries, most of the big customers come from Europe, America and other countries in the world, we can guarantee the quality and price. In recent decades, with the efforts of all employees, we have established many cooperative companies in shandong, henan, guangdong and other places. Our corporate purpose is based on the market, enhance the strength, take the road of scientific and environmental sustainable development, relying on the country. Technology r & d center, increase the investment in r & d, based on the domestic market, expand the international market, manufacturing quality products, sincere service to the society, into a modern, ecological, scientific and technological enterprise world.
Advantage
In stock
Company Profile Introduction
-
You may like
Recommended supplier
| Product name | Price | Suppliers | Update time | |
|---|---|---|---|---|
| $48.00/25mg |
VIP5Y
|
TargetMol Chemicals Inc.
|
2024-11-19 | |
| $48.00/25mg |
VIP3Y
|
TargetMol Chemicals Inc.
|
2024-11-19 | |
| $9.90/1KG |
VIP6Y
|
Hebei Weibang Biotechnology Co., Ltd
|
2024-10-31 | |
| $30.00/1kg |
Henan Bao Enluo International TradeCo.，LTD
|
2023-07-28 | ||
| $35.00/1kg |
Hebei baicao biology science and technology co., ltd
|
2022-04-08 | ||
| $15.00/1KG |
Zhuozhou Wenxi import and Export Co., Ltd
|
2021-07-11 | ||
| $10.00/1Kg/Bag |
Wuhan Monad Medicine Tech Co.,LTD
|
2021-04-16 | ||
| $2.00/1kg |
VIP7Y
|
Career Henan Chemical Co
|
2018-12-24 | |
| $15.00/1KG |
Zhuozhou Wenxi import and Export Co., Ltd
|
2021-07-09 | ||
| $15.00/1KG |
Zhuozhou Wenxi import and Export Co., Ltd
|
2021-06-27 |
Japan
- Since: 2017-12-08
- Address: Building A, Enjoy city, Zhongshan East Road, Shijiazhuang city, Hebei province
INQUIRY
xing
13288715578
sales@hbmojin.com
13288715578
sales@hbmojin.com