1.Description:

HonorMax 9, an ethylbenzene dehydrogenation catalyst, has higher

activity, excellent selectivity and superior mechanical strength. It could be

used in both Badger and Lummus process units. Its operation ratio of steam to

oil is wide and from 1.0 to 2.0

Please contact us for further information on ethylbenzene dehydrogenation

catalysts for a specific end-use.

2. Typical Technical data should be considered representative or typical only and should not be used for specification purposes.

Physical         Appearance            Red-brown Cylinder

Properties:       Average Diameter      3.00±0.3 mm

Average Length        5.5±1.5 mm

Shipping Desity         1.35±0.15 kg/L

Crush Strength        >=20 N/mm

3.Storage:

Keep container tightly closed to avoid moisture absorption.

Store in a cool and dry place.

4.Handling:

Avoid eye and skin contact.

Do not take internal.

Avoid breathing dust and contact with skin.

Wear protective equipment for handling to avoid exposure.

5.Stability:

Stable under recommended storage conditions.

6.Packaging:

1,000KGS/Jumbo Bag

7.Availability:

HonorMax 9 catalyst is available for shipment 120 days from receipt of

purchase order.

8.Health & Safety: This material is corrosive solid.

9.Precautions: Please refer to the appropriate material safety data sheet (MSDS) prior to using this product.

10.Warranty:

Wuxi Honor Shine Chemical Co.,Ltd. will replace any material found  defective. Because the transportation, storage, handling and application of this material are beyond our control, we can accept no liability for the results obtained.

11.Disclaimer:

All information on this data sheet is based on laboratory testing and is not

intended for design purposes.  

We Makes no  representations or warranties of any kind concerning this data.

This information is based on our present state of knowledge and is intended to provide general notes on our  products and their uses. It should not therefore be construed as guaranteeing specific properties of the products described or their suitability for a particular application. Any existing industrial property rights must be observed.

The quality of our products is guaranteed under our General Conditions and Terms of Sale.