Strontiumhydroxid Chemische Eigenschaften,Einsatz,Produktion Methoden
R-S?tze Betriebsanweisung:
R34:Verursacht Ver?tzungen.
S-S?tze Betriebsanweisung:
S26:Bei Berührung mit den Augen sofort gründlich mit Wasser abspülen und Arzt konsultieren.
S27:Beschmutzte, getr?nkte Kleidung sofort ausziehen.
S36/37/39:Bei der Arbeit geeignete Schutzkleidung,Schutzhandschuhe und Schutzbrille/Gesichtsschutz tragen.
S45:Bei Unfall oder Unwohlsein sofort Arzt zuziehen (wenn m?glich, dieses Etikett vorzeigen).
Beschreibung
Strontium Hydroxide occurs as an anhydrate whose prismatic, colorless
crystals are deliquescent. A monohydrate and octahydrate
are also known.Strontium hydroxide is slightly soluble in water but,
surprisingly, the octahydrate is much more soluble. It
is the latter that is supplied commercially for most applications.When the octahydrate is heated, seven waters of
hydration are lost to form the monohydrate and finally the oxide.
Chemische Eigenschaften
colourless deliquescent crystals
Physikalische Eigenschaften
White deliquescent crystal; density 3.625 g/cm
3; melts at 375°C in hydrogen atmosphere; converts to oxide at 710°C; slightly soluble in water at 0°C, 0.41 g/100 mL, soluble in boiling water at 100°C, 21.83 g/100 mL; soluble in acids and ammonium chloride solution.
The octahydrate consists of colorless, tetragonal, deliquescent crystals; density 1.90 g/cm
3; loses all its water molecules at 100°C; sparingly soluble in water at low temperatures, 0.90 g/100 mL at 0°C; soluble in boiling water, 47.7 g/100 mL at 100°C; aqueous solution highly alkaline; soluble in acids and in ammonium chloride solution; insoluble in acetone.
Verwenden
Strontium hydroxide [Sr(OH)2] is used to extract sugar from sugar beet molasses. It is also used in the manufacture of soaps, adhesives, plastics, glass, and lubricants that can be used in very high or low temperature environments.
synthetische
Preparation Strontium hydroxide is prepared by treating strontium oxide with water: SrO + H
2O → Sr(OH)
2 Alternatively, Sr(OH)2 is made by heating strontium carbonate or strontium sulfide with steam at temperatures around 500 to 600°C: SrCO
3 + H
2O → Sr(OH)
2 + CO
2 SrS + 2H
2O → Sr(OH)
2 + H
2S.
l?uterung methode
Crystallise the hydroxide from hot water (2.2mL/g) by cooling to 0o.
Strontiumhydroxid Upstream-Materialien And Downstream Produkte
Upstream-Materialien
Downstream Produkte